nPlayback
To play back a recorded conversation, memo, or message:
1Press the key programmed as Playback or access the Menu {page 9}.
•If the last action on your transceiver was to auto record your conversation, “STORE?” will appear on the display, otherwise a recording channel with the time of the recording will appear.
2Press 
/
to select the channel you want to play.
•“AR” represents auto recorded conversations, “RM” represents auto reply messages, and “VM” represents voice memos.
3The transceiver will announce the time and channel, then the recording will play back.
•When the entire recording has been played, “END OF MESSAGE” is displayed. You can also end the recording at any time by pressing 
.
•To delete the selected recording, press 
. To clear all the recorded data, press and hold 
.
Voice Guide
When changing the zone and/or channel, an audio voice will announce the new zone and channel. Additionally, when changing a function setting, the new setting will be announced.
Note: Voice announcements vary by dealer setting.
22