TK-7150
34
ADJUSTMENT
1. Key Functions

1-1. Front Panel

SCNSP OP OSABMON
CALL
Volume Display Selector Power switch
PF5
PF1 PF2 PF4PF3 PF6

1-2. Panel Test Mode

When the Function is Off ( does not appear)

Controls Function
PF1 Test channel down
PF2 Test channel up
PF3 Test mode/Tuning mode changeover
PF4 Noise squelch off
PF5 Wide/Narrow changeover
When the narrow is on, appears
PF6 After pressing PF6 key, press PF3, PF4, PF5,
and PF6 to activate the following functions
(See the table below)
Selector knob Signalling up/down

When the Function is On ( appears)

Controls Function
PF1 No function
PF2 No function
PF3 appears on the right side
When the Sig No.9 (DTMF) is on, DTMF [9] is
transmitted.
When the Sig No.12 (MSK) is on, the
contineous MSK tone is transmitted.
PF4 Compander on (OP icon appears) / off
PF5 Beat shift on (B icon appears) / off
PF6 MSK speed changeover (1200/2400bps). When
MSK speed is 2400 bps, the Mail icon appears.
Selector knob Test signalling up/down

1-3. Panel Tuning mode

Controls Function
PF1 Tuning item down
PF2 Tuning item up
PF3 Test mode/Tuning mode changeover
PF4 Noise squelch off
PF5 Wide/Narrow changeover
PF6
Tuning value writeMove to the next tuning item
Selector knob Tuning value up/down
2. Panel Test Mode

The transceiver’s transmission output, receiver sensitiv-

ity, and other items are measured and QT, DQT, 2-Tone and

DTMF signalling is decoded in this mode.

2-1. To Enter the Panel Test Mode

Hold down [PF1] and turn the power switch on to enter

this mode. The test frequency channel and test signalling

channel will be displayed.

Test frequency CH Test signalling CH
OP B

2-2. Test Frequency Channel (MHz)

CH RX TX
1/FC 155.15 155.00
2/FL 136.15 136.00
3/FH 173.85 174.00
4145.55 145.50
5164.55 164.50
6155.00 155.00
7155.20 155.20
8155.40 155.40

2-3. Test Signalling Channel

No. Decode Encode
1None None
2LTR LTR
3QT 67Hz QT 67Hz
4QT 151.4Hz QT 151.4Hz
5QT 210.7Hz QT 210.7Hz
6QT 254.1Hz QT 254.1Hz
7DQT 023N DQT 023N
8DQT 754I DQT 754I
9DTMF decode (159D) DTMF encode (159D)
10 2-Tone decode 2-Tone encode
A : 304.7Hz, B : 3106.0Hz A : 304.7Hz, B : 3106.0Hz
11 Single tone 979.9Hz Single tone 979.9Hz
12 MSK MSK
13 None Single tone : 1kHz
3. Panel Tuning Mode

The transceiver is adjusted in this mode.

3-1. To Enter the Panel Tuning Mode

Press the [PF3] key in the panel test mode.

The adjustment items, the frequency and signalling, other

than the maximum deviation and sensitivity, return to the val-

ues that were effective for the test frequency channel and

test signalling channel before entering the panel tuning

mode.