SCAN

Scan allows each of the channels that has a receive frequency stored to be automatically monitored for activity. Channels must be added to the scanning sequence in order to be scanned.

To activate Scan, press the key programmed as Scan.

•The icon appears on the display.

•The channel add indicator () will appear on the display when the selected channel is added to the scan sequence.

•If only one channel is added to the scan sequence or has a frequency stored, pressing the Scan key causes an error tone to sound and Scan does not operate.

To stop scanning, press the Scan key again.

PREFERRED SCAN

A Preferred channel must be programmed in order for Preferred Scan to function.

During Scan, the Preferred channel is checked during regular intervals (set up by your dealer). This interval ensures that you do not miss important transmissions on your Preferred channel, while scanning other channels.

• The indicator appears on the display when the Preferred channel is selected.

BUSY FREQUENCY STOP

The transceiver will automatically pause on a channel when a signal is detected. The transceiver will remain on the busy channel for either a short time or until the signal drops out, depending on which Scan Resume type your dealer has set up (see below).

•The squelch must be adjusted to the noise threshold point with no signals present for Busy Frequency Stop to operate.

When the transceiver has paused on a channel, you can transmit by pressing the microphone PTT switch. Depending on your dealer settings, Scan may either end when you transmit or continue to operate. If Scan is set to continue even after transmitting, then it will remain on the current channel for a predetermined time before continuing. This time is set so that if a signal re-appears on the channel, or if you transmit again, Scan will remain on the current channel until the signal either drops out or you stop transmitting.

SCAN RESUME TYPE

Scan Resume controls when the transceiver continues scanning after stopping due on a busy channel.

•Time-Operated Scan: After stopping on a busy channel, Scan resumes after a predetermined time (set by your dealer) whether or not the signal is still present on the channel.

•Carrier-Operated Scan: The transceiver remains on the busy channel until the signal ends. Scan resumes after a predetermined time (set by your dealer) after the signal has dropped out.

ADD TO SCAN/ REMOVE FROM SCAN

Press the key programmed as Scan Delete/Add, to add or remove each channel to or from the scan sequence. Only those channels that have been added to the scan sequence will be scanned. Deleted channels will be skipped.

•The channel add indicator () will appear on the display when the selected channel is added to the scan sequence.

SCAN REVERT CHANNEL

Your dealer can set up 1 of 4 different types of Scan Reverts for your transceiver. A Scan Revert channel is the channel that you are able to transmit on during Scan, when you press the microphone PTT switch.

•Preferred Channel: If your dealer has programmed a Preferred channel, this channel is the revert channel.

•Preferred Channel + Talkback: If your dealer has programmed a Preferred channel, this channel is the revert channel. However, when paused on a busy channel, you are able to “talk back” on that channel until Scan resumes.

•Selected Channel: The last channel selected before you begain scanning is assigned as the revert channel.

•Selected Channel + Talkback: The last channel selected before you begain scanning is assigned as the revert channel. However, when paused on a busy channel, you are able to “talk back” on that channel until Scan resumes.

12