VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
When using the optional
VOICE MEMOS
RECORDING A VOICE MEMO
You can record up to 4 voice memos, each with a duration of up to 15 seconds. To record a voice memo for later playback:
1Press and hold the key programmed as Playback 1 to 4 for approximately 1 second to begin recording. (Each Playback key corresponds to a memory location of 1 to 4.)
•The duration of recording memory will appear on the display and begin counting down. The voice memo can record only the received signal.
Note: Playback keys can be set up for either voice memos or voice messages by your dealer. The keys function differently depending on how they are set up, so be sure to press a Playback key set up for use for voice memos.
2Press the key to end the recording at any time and store it into the transceiver memory.
•If the memory becomes full, recording will stop automatically and store the voice memo to memory.
•“WRITING” appears on the display while the recording is being stored to memory.
PLAYING BACK A VOICE MEMO
To play back a recorded voice memo:
1Press the key programmed as Playback 1 to 4 to play back the specified voice memo.
2Press the key to end the playback at any time.
DELETING A VOICE MEMO
To delete a recorded voice memo:
1Press the key programmed as Playback 1 to 4 to select and play back the specified voice memo.
2Press the ■ key to delete the recording.
•“DELETE?” appears on the display.
3Press the ■ key again to confirm the selection and delete the recording from memory.
•To cancel, press the key.
VOICE MESSAGES
RECORDING A VOICE MESSAGE
You can record up to 4 voice messages, each with a duration of up to 15 seconds. To record a voice message for later playback/transmission:
1Press and hold the key programmed as Playback 1 to 4 for approximately 1 second. (Each Playback key corresponds to a memory location of 1 to 4).
•“REC/PLAY” appears on the display.
•Press thekey to cancel and return to normal operation.
Note: Playback keys can be set up for either voice messages or voice memos by your dealer. The keys function differently depending on how they are set up, so be sure to press a Playback key set up for use for voice messages.
2Press the ■ key and speak into the microphone to begin recording your message.
•The duration of recording memory will appear on the display and begin counting down.
3Press the key to end the recording at any time and store it into the transceiver memory.
•If the memory becomes full, recording will stop automatically and store the voice message to memory.
•“WRITING” appears on the display while the recording is being stored to memory.
20