Kenwood TK-90 SEND THE GPS DATA, SHORT TEXT MESSAGES, GPS D, GPS P

If a GPS unit has been installed and is set up by your dealer, your transceiver may automatically transmit your GPS data.

MANUALLY SENDING THE GPS DATA

1While in Selcall Mode, press the key programmed as Selcall to view the Selcall list.

2 Press the CH and keys to select the ID of the station you want to call.

3Press the D> key to view the Status list.

4 Press the CH and keys to select “GPS DATA”.

5Press the ■ key or the PTT switch to send the GPS data.

• While making the call, the icon flashes and “SEND DATA” appears on the display.

•“COMPLETE” appears on the display when the call has been successfully transmitted.

GPS POLLING

If your transceiver receives a GPS Polling request, it will automatically transmit your GPS data to the requesting station.

•“SEND DATA” appears on the display until the data has been transmitted.

To send and receive short text messages, you must connect the transceiver to a PC. Ask your dealer for details.

•Short text messages can contain a maximum of 48 characters.