2Press the CH and keys to select CODE A to

CODE D.

•Press the D> key to view the character message of the selected code, and the <C key to return to the code selection.

3Press the ■ key or the PTT switch to send the message.

•While making the call, theicon flashes.

4When the call connects, the LED indicator flashes orange. Begin your conversation by pressing the PTT switch and speaking into the microphone.

• A proceed tone sounds and the

icon remains on

the display.

 

5After you have finished your call, release the PTT switch.

•Depending on the Auto Reset time set up by your dealer, your speaker will mute if no reponse is received. You can unmute the speaker to remain in standby mode by pressing the key programmed as Monitor.

SELECTING A MEMORY CALL USING A MICROPHONE KEYPAD

1While in Selcall Mode, press and hold the PTT switch, then enter the # key, key A to D (to select the respective memory location), followed by the # key again

•Releasing the PTT switch before entering the final # key will cancel the call.

•While making the call, theicon flashes.

2When the call connects, the LED indicator flashes orange. Begin your conversation by pressing the PTT switch and speaking into the microphone.

• A proceed tone sounds and the

icon remains on

the display.

 

3After you have finished your call, release the PTT switch.

•Depending on the Auto Reset time set up by your dealer, your speaker will mute if no reponse is received. You can unmute the speaker to remain in standby mode by pressing the # key or the key programmed as Monitor.

MANUAL STATUS CALLS

You can send and receive 2-digit Status codes which may be decided in your talk group. Codes can contain up to 12 alphanumeric character messages. Status codes range from 10 to 99 (80 ~ 99 are reserved for special messages).

MAKING A STATUS CALL USING THE TRANSCEIVER KEYS

1While in Selcall Mode, press the key programmed as Selcall to view the Selcall list.

2 Press the CH and keys to select the ID of the station you want to call.

3Press the D> key to view the Status list.

4 Press the CH and keys to select the status you want to transmit.

5Press the ■ key or the PTT switch to send the status call.

• While making the call, the icon flashes and “SEND DATA” appears on the display.

•“COMPLETE” appears on the display when the call has been successfully transmitted.

•If the call cannot go through, “NO REPLY” appears on the display.

MAKING A STATUS CALL USING A MICROPHONE KEYPAD

1While in Selcall Mode, press and hold the PTT switch, then enter the 3-digit ID of the station you want to call.

2While continuing to hold the PTT switch, press the

key to enter Status entry mode.

3While continuing to hold the PTT switch, enter the 2-digit ID number of the status you want to transmit.

4While continuing to hold the PTT switch, press the

# key to send the status call.

•Releasing the PTT switch before entering the # key will cancel the call.

• While making the call, the icon flashes and “SEND DATA” appears on the display.

•“COMPLETE” appears on the display when the call has been successfully transmitted.

•If the call cannot go through, “NO REPLY” appears on the display.

14