Specifications
| ||||
GENERAL | VHF/UHF CONVENTIONAL REPEATERS & BASE STATIONS |
| ||
Frequency Range: |
|
|
|
|
K1 | 146 - 162 MHz | 146 - 174 MHz | 450 - 480 MHz | 450 - 480 MHz |
K2 | 158 - 174 MHz | 136 - 150 MHz | 480 - 512 MHz | 480 - 512 MHz |
K3 | 136 - 150 MHz | n/a | 400 - 430 MHz | n/a |
Base Station (Simplex): |
|
|
|
|
Number of Channels, Local* | 32 | 16 | 32 | 16 |
Number of Channels, Tone Remote* | 7 | 7 | 7 | 7 |
Number of Channels, DC Remote* | 2 | 2 | 2 | 2 |
Repeater (Duplex): |
|
|
|
|
Number of Channels (typical) |
|
| 1 |
|
Channel Spacing: |
|
|
|
|
Wideband | 30, 25 kHz | 30, 25 kHz | 25 kHz | 25 kHz |
Narrowband | 15, 12.5 kHz | 15, 12.5 kHz | 12.5 kHz | 12.5 kHz |
PLL Channel Step | 2.5, 5, 6.25 kHz | 2.5, 5, 6.25, 7.5 kHz | 5, 6.25 kHz | 5, 6.25 kHz |
Operating Voltage |
| 115 / 230 VAC, |
| |
Backup DC Voltage |
|
| 13.4 VDC |
|
DC current requirement, standby |
|
| < 2.5 A* |
|
DC current requirement, transmit | <20 A at 110W | <25 A at 110W | <20 A at 100W | <25 A at 100W |
Operating Temperature |
|
| ||
Frequency Stability | +/- 0.00015% | +/- 0.0002% | +/- 0.00015% | +/- 0.0002% |
Antenna Impedance |
|
| 50Ω |
|
FCC ID: |
|
|
|
|
K1 | ALH30633110 | ALH31103110 | ALH30643110 | ALH31113110 |
K2 | ALH30633120 | ALH31103120 | ALH30643120 | ALH31113120 |
K3 | ALH30633130 | n/a | ALH30643120 | n/a |
FCC Compliance: |
|
|
|
|
K1 | FCC parts 22, 74, 90 | FCC parts 22, 74, 90 | FCC parts 22, 74, 90, 95 | FCC parts 22, 74, 90, 95 |
K2 | FCC parts 22, 74, 90 | FCC parts 90, 90.210 | FCC part 90 | FCC parts 90, 90.210 |
K3 | FCC parts 22, 74, 90 | n/a | FCC part 90 | n/a |
IC Certification: |
|
|
|
|
K1 | 282195598A | 282195726A | 282195600A | 282195725A |
K2 | 282195598A | 282195742A | n/a | n/a |
K3 | 282195598A | n/a | 282195600A | n/a |
|
|
|
|
|
RECEIVER | ||||
Sensitivity: |
|
|
|
|
12 dB SINAD | 0.30 µV | 0.35 µV | 0.30 µV | 0.35 µV |
20 dB Quieting | 0.40 µV | 0.45 µV | 0.40 µV | 0.45 µV |
Selectivity |
|
|
|
|
Wideband (+/- 30 kHz) | 95 dB | 85 dB | n/a | n/a |
Wideband (+/- 25 kHz) | n/a | n/a | 90 dB | 83 dB |
Narrowband (+/- 15 kHz) | 89 dB | 80 dB | n/a | n/a |
Narrowband (+/- 12.5 kHz) | 87 dB | 77 dB | 80 dB | 75 dB |
Intermodulation Distortion |
|
|
|
|
Wideband (+/- 30, 60 kHz) | 90 dB | 80 dB | n/a | n/a |
Wideband (+/- 25, 50 kHz) | n/a | n/a | 85 dB | 78 dB |
Narrowband (+/- 15, 30 kHz) | 85 dB | 75 dB | n/a | n/a |
Narrowband (+/- 12.5, 25 kHz) | n/a | n/a | 80 dB | 75 dB |
Spurious & Image Rejection | 100 dB | 90 dB | 100 dB | 90 dB |
FM Hum & Noise: |
|
|
|
|
Wideband | 60 dB | 50 dB | 60 dB | 50 dB |
Narrowband | 55 dB | 45 dB | 55 dB | 45 dB |
Audio Output, local speaker | 4 W at < 2% distortion | 4 W at < 5% distortion | 4 W at < 2% distortion | 4 W at < 5% distortion |
Band Spread: |
|
|
|
|
K1 | 3 MHz | 3 MHz | 5 MHz | 5 MHz |
K2 | 3 MHz | 3 MHz | 5 MHz | 5 MHz |
K3 | 3 MHz | n/a | 5 MHz | n/a |
Measurement Compliance | EIA / | TIA / | EIA / | TIA / |
|
|
|
|
|
TRANSMITTER | ||||
RF Power Output, no external amplifier | 0.1 W to 5 W | 15 W to 50 W | 0.1 W to 5 W | 15 W to 40 W |
Duty Cycle, no external amplifier | 100% | 100% at 25 W | 100% | 100% at 25 W |
RF Power Output with external amplifier* | 40 W to 300 W* | 40 W to 300 W* | 40 W to 250 W* | 40 W to 250 W* |
Duty Cycle with external amplifier |
|
| 100% |
|
Emission Designator: |
|
|
|
|
Wideband Voice | 16K0F3E | 16K0F3E | 16K0F3E | 16K0F3E |
Wideband Data (POCSAG) | 16K0F1D | n/a | 16K0F1D | n/a |
Narrowband Voice | 11K0F3E | 11K0F3E | 11K0F3E | 11K0F3E |
Narrowband Data (POCSAG) | 11K0F1D | n/a | 11K0F1D | n/a |
Spurious Response | 70 dB | 80 dB | 70 dB | 80 dB |
FM Hum and Noise: |
|
|
|
|
Wideband | 55 dB | 50 dB | 55 dB | 50 dB |
Narrowband | 50 dB | 45 dB | 50 dB | 45 dB |
Local Microphone Impedance |
|
| 600Ω |
|
Audio Distortion | < 0.5% at 1000 Hz | < 3% at 1000 Hz | < 0.5% at 1000 Hz | < 3% at 1000 Hz |
Band Spread: |
|
|
|
|
K1 | 38 MHz | 28 MHz | 30 MHz | 30 MHz |
K2 | 38 MHz | 14 MHz | 32 MHz | 32 MHz |
K3 | 38 MHz | n/a | 30 MHz | n/a |
Measurement Compliance | TIA / | TIA / |
*Depends on configuration and equipment options.
Kenwood USA Corp. is committed to a policy of constant improvement in features, quality and performance. To accommodate these improvements, all technical information and specifications are subject to change without notice. Custom options and configurations are available, if needed. For more information, call
ADS#12408 Printed in USA