Agilent Technologies 8753ES manual Agilent 8753ET Specifications

Agilent 8753ET Specifications

Test-Port Output Characteristics

Test Port Input Characteristics

Frequency characteristics Range

Option 006

Resolution

Stability4

Option 1D5

Accuracy

Power range

Resolution

Level accuracy1

Level linearity1

Standard

-20 to -15 dBm -15 to 0 dBm 0 to +5 dBm

Option 004

-15 to +5 dBm +5 to +10 dBm

Impedance

300 kHz to 3 GHz

3 GHz to 6 GHz

Spectral purity 2nd harmonic2

Option 002 3rd harmonic3

Option 002

Nonharmonic spurious

300 kHz to 3 GHz

300 kHz to 6 GHz

1 Hz

±7.5 ppm (0° to 55° C) ±3 ppm/year

±0.05 ppm (0° to 55° C) ±0.5 ppm/year

±10 ppm at 25° ±5° C -20 to +5 dBm

-85 to +10 dBm (with Option 004)

0.01dB ±1.0 dB

±0.5 dB ±0.2 dB ±0.5 dB

±0.2 dB ±0.5 dB

50 Ω (nominal)

>18 dB RL (< 1.28 SWR) >14 dB RL (<1.50 SWR)

<-40 dBc at 0 dBm4 <-50 dBc at -10 dBm4

<-25 dBc at maximum output power

<-40 dBc at 0 dBm <-50 dBc at -10 dBm

<-25 dBc at maximum output power

Frequency range	300 kHz to 3 GHz
Option 006	300 kHz to 6 GHz
Average noise level
300 kHz to 3 GHz	<-90 dBm (3 kHz BW)
300 kHz to 3 GHz	<-110 dBm (10 Hz BW)
300 kHz to 3 GHz	<-120 dBm (10 Hz BW)
	typical
3 GHz to 6 GHz	<-85 dBm (3 kHz BW)
3 GHz to 6 GHz	<-105 dBm (10 Hz BW)
3 GHz to 6 GHz	<-114 dBm (10 Hz BW)
	typical
Maximum input level	+10 dBm reflection port
	0 dBm transmission port
Damage level	>+26 dBm or 35 VDC
Impedance	50 Ω (nominal)
Frequency response5
300 kHz to 3 GHz	±1.0 dB
3 GHz to 6 GHz	±2.0 dB
Harmonics (Option 002)
2nd harmonic2	<-15 dBc at +8 dBm
	<-30 dBc at 0 dBm4
	<-45 dBc at -15 dBm4
3rd harmonic3	<-30 dBc at +8 dBm
	<-50 dBc at 0 dBm4
	<-50 dBc at -15 dBm4
Harmonic measurement accuracy5
300 kHz to 3 GHz	±1.5 dB
3 GHz to 6 GHz	±3 dB (Option 006)
Harmonic measurement dynamic range4
-40 dBc (output = -10 dBm, input = <-15 dBm)
Frequency offset mode6
Frequency range	300 kHz to 3 GHz
Option 006	300 kHz to 6 GHz
R-channel input requirements
Power level
300 kHz to 3 GHz	0 to -35 dBm
3 GHz to 6 GHz	0 to -30 dBm

Mixer related	<-30 dBc at +10 dBm
	<-55 dBc at -10 dBm

LO Spectral purity
Maximum spurious input	<-25 dBc
Residual FM	<20 kHz
LO frequency accuracy6	±1 MHz at nominal frequency

1.	Relative to -5 dBm output power for the Agilent 8753ET; -10 dBm output power
	for 8753ET with Option 004.
2.	16 MHz to 3 GHz.
3.	16 MHz to 2 GHz.
4.	Typical performance.
5.	25° C ± 5° C.
6.	The Agilent 8753ET source characteristics and measurement accuracy in this
	mode are dependent on the stability of the external LO source. The RF source
	tracks the LO to maintain a stable IF signal at the R-channel receiver input.
14	Degradation in accuracy is negligible when using an Agilent 8642A/B, 8656B,
	or E4432B RF signal generator as the LO source.