Agilent Technologies 8753ES manual Options, General Conditions, Cabinet Dimensions 8753ET/ES

Environmental Characteristics Measurement Throughput Summary

General Conditions

RFI and EMI susceptibility: defined by VDE 0730, CISPR Publication 11, and FCC Class B Standards.

ESD (electrostatic discharge): must be eliminated by use of static-safe work procedures and an anti- static bench mat. The flexible rubber keypad pro- tects key contacts from dust, but the environment should be as dust-free as possible for optimal relia- bility.

Operating conditions
Temperature	0° to 55° C
(unless otherwise noted)
Humidity	5% to 95% at 40° C
	(non-condensing)
Altitude	0 to 4500 meters
	(15,000 feet)
Non-operating storage conditions
Temperature	-40° C to +70° C
Humidity	0 to 90% relative at +65° C
	(non-condensing)
Altitude	0 to 15,240 meters
	(50,000 feet)
Weight (8753ET/ES)
Net	21 kg (46 lb)
Shipping	35 kg (77 lb)

Cabinet Dimensions (8753ET/ES)

(These dimensions exclude front and rear panel protrusions.)

222 mm H x 425 mm W x 457 mm D (8.75 in x 16.75 in x 18.0 in)

Agilent 8753ET/ES

Physical dimensions

1.One-port calibration, with a 6 kHz IF bandwidth. Includes system retrace time, but does not include bandswitch time. Time-domain gating is assumed off.

2.Same as footnote 1, but for an S21 measurement with full two-port calibration. Includes RF switching time.

3.Option 010 only, gating off.

4.Measured with an Omnibook 7100 266 MHz Pentium® II computer.

5.Does not include error from the 8753T/ES source and receiver harmonics.

The following table shows typical measurement times in milliseconds.

Typical Time for Completion (msec)

	Number of Points
Measurement	51	201	401	1601
Start=1 GHz, Span=10 MHz, IFBW=6 kHz
Uncorrected, 1-port calibration1	32	70	121	423
Two-port calibration2	62	139	240	848
Start=30 kHz, Stop=3 GHz, IFBW=6 kHz
Uncorrected, 1-port calibration1	202	270	304	615
Two-port calibration2	402	540	607	1237
Start=30 kHz, Stop=6 GHz, IFBW=6 kHz
Uncorrected, 1-port calibration1	310	380	415	658
Two-port calibration2	618	757	829	1315
Time domain
(increase over uncorrected sweep time)3
Conversion	12	42	86	378
Gating	14	40	80	349
GPIB data transfer4
Internal binary	10	16	21	58
ASCII	35	112	214	831
IEEE 754 floating point format
32-bit	11	19	28	83
64-bit	13	26	42	141

Options

Harmonic measurements (Option 002)

Measures amplifier 2nd and 3rd harmonics on a swept-frequency basis for fundamental signals above 16 MHz.

Dynamic Range (source at +10 dBm, receiver <+30 dBm)

	+40 dBc (minimum)
Accuracy5	±1 dB (<6 GHz)

Step attenuator (Option 004)

Provides source output power range from -85 to +10 dBm for 8753ET model.

6 GHz operation (Option 006)

With Option 006, performance is extended to

6 GHz. When external source, tuned receiver or harmonic mode is used, the receiver is capable of measuring signals up to 6 GHz.

Time domain (Option 010)

Transforms data from the frequency domain to the time domain using a Fourier transformation technique.

High-stability frequency reference (Option 1D5)

This option adds an ovenized 10-MHz frequency reference output. It is connected to the external reference input on the rear panel. See the “General Characteristics” section for below specifications.

21