Agilent Technologies 8753ET, 8753ES Input frequency accuracy requirement2, Display resolution

External source mode1 (CW time sweep only)

Frequency range	300 kHz to 6 GHz
R-channel input requirements2
Power level	0 to -25 dBm
Spectral purity
Maximum spurious input	<-30 dBc
Residual FM	<20 kHz
Typical settling time	500 ms (automatic)
	50 ms (manual)
Frequency readout accuracy2	0.1% (automatic)
Input frequency accuracy requirement2
Manual	-0.5 to 5 MHz
Accuracy	(See magnitude and phase
	characteristics)

Magnitude characteristics

Dynamic accuracy (10 Hz IF BW)

Display resolution	0.001 dB/division
Marker resolution3	0.001 dB
Trace noise

(0 dBm at transmission port or +5 dBm at reflection port, ratio measurement, 3 kHz BW)

300 kHz to 3 GHz	<0.006 dB rms
3 GHz to 6 GHz	<0.010 dB rms

1.See the Agilent 8753ET/ES descriptions and options for a functional description. Measurement accuracy is dependent on the stability of the input signal.

2.Typical performance.

3.Marker resolution for magnitude, phase and delay is dependent upon measured value. Resolution is limited to five digits.

Reference level
Range	±500 dB
Resolution	0.001 dB

Stability2
300 kHz to 3 GHz	0.02 dB/1° C
3 GHz to 6 GHz	0.04 dB/1° C

Phase Characteristics

Dynamic accuracy (10 Hz IF BW)

Range	±180°
Display resolution	0.01°/division
Marker resolution3	0.01°
Trace noise
(0 dBm at transmission port or +5 dBm at reflection
port, ratio measurement, 3 kHz BW)
300 kHz to 3 GHz	<0.038° rms
3 GHz to 6 GHz	<0.070° rms
Reference level
Range	-180° to +180°
Resolution	0.01°
Stability
30 kHz to 3 GHz	0.05°/° C
3 GHz to 6 GHz	0.20°/° C
Polar characteristics
Range	10 x 10–12to 1000 units full
	scale
Reference	±500 units

15