Agilent Technologies 8753ET, 8753ES Ohm Accessory Kits, RF Limiter, 85024A High-Frequency Probe

Connectors	50-ohm type-N (f) to
	75-ohm type-N (m)
	standard Option 004,
	50-ohm type-N (m) to
	75-ohm type-N (f)
Dimensions	14-mm D x 70-mm L
	(0.56 in x 2.75 in)
Weight	Net 0.1 kg (0.316 lb)

50-Ohm Accessory Kits

The 11853A 50-ohm type-N and the 11854A 50-ohm BNC accessory kits provide the RF components generally required when using either the 85046A, 85047A, or 11850C with the 8753ES Option 011 when measuring devices having 50-ohm type-N

or BNC connectors. These kits are supplied with a storage case.

11853A 50-ohm type-N accessory kit
Includes	Part number
Type-N (f) short	HP 11511A
Type-N (m) short	HP 11512A
Type-N (m) to N (m) adapter	1250-1475
Type-N (f) to N (f) adapter	1250-1472
11854A 50-ohm BNC accessory kit
Includes	Part number

Type-N (m) to BNC female adapter 1250-1476

Type-N (m) to BNC male adapter	1250-1473
Type-N (f) to BNC male adapter	1250-1477
Type-N (f) to BNC female adapter	1250-1474
BNC (m) short	1250-0929

75-Ohm Accessory Kits

The 11855A 75-ohm type-N and the 11856A 75-ohm BNC accessory kits provide the RF components generally required when using either the 85046B or the 11850D power splitter with the 8753ES Option 011 when measuring devices having 75-ohm type-N or BNC connectors. These kits are supplied with a storage case.

11855A 75-ohm type-N accessory kit
Includes	Part number
Type-N (f) short	1250-1531
Type-N (m) short	1250-1530
Type-N (m) to N (m) adapter	1250-1528
Type-N (f) to N (f) adapter	1250-1529
Type-N (m) termination	1250-1532
11856A 75-ohm BNC accessory kit
Includes	Part number
Type-N (m) to BNC (f) adapter	1250-1535
Type-N (m) to BNC (m) adapter	1250-1533
Type-N (f) to BNC (m) adapter	1250-1534
Type-N (f) to BNC (f) adapter	1250-1536
BNC (m) short	1250-0929
BNC (m) termination	11652-60010

RF Limiter

Externally attaches to one or both ports of the analyzer. Provides protection against potential high-power transients from external devices.

Specifications
11930A 7-mm RF limiter
Frequency range	DC to 6 GHz
Nominal insertion loss
DC to 3 GHz	1.0 dB
3 GHz to 6 GHz	1.5 dB
Return loss
DC to 3 GHz	22 dB
3 GHz to 6 GHz	20 dB
Maximum input power	3 W
Maximum DC	30 V, 350 mA
11930B 50-ohm type-N RF limiter2
Frequency range	5 MHz to 6 GHz
Nominal insertion loss
5 MHz to 3 GHz	1.0 dB1
3 GHz to 6 GHz	1.5 dB
Return loss
	5 MHz to 3 GHz 21 dB1
	3 GHz to 6 GHz 17 dB
Maximum input power	3W

85024A High-Frequency Probe

Two probes may be powered directly from the front panel of the 8753ET/ES. Refer to technical specifications, Agilent literature #5954-8393, for more information.

Specifications
Input capacitance	<0.7 pF (nominal)
(at 500 MHz)
Input resistance	1 Megohm (nominal)
Bandwidth	300 kHz to 3 GHz
Gain (at 500 MHz)	0 dB ±1 dB
Frequency response
300 kHz to 1 GHz	±1 dB
1 GHz to 3 GHz	+2, -3 dB
Input voltage for
<1 dB compression	0.3 V
Supplement characteristics
Noise figure
<100 MHz	<50 dB
100 MHz to 3 GHz	<25 dB
Includes	Part/model number
Type-N (m) adapter	11880A
10:1 divider	11881A
Spare 12 mil probes	85024-20012
2.5-inch ground lead	01223-61302
Hook tip	10229
Spanner tip	5060-0549
Probe tip nut driver	8710-1806
1. Return loss and insertion loss limited below 16 MHz by series capacitor.		27
2. Internal bias tees cannot be used with this limiter.