4
1
2 Connect the transceiver’s DC power connector to the
connector on the DC power cable.
• Press the connectors firmly together until the locking tab
clicks.
Note:
◆ For your transceiver to fully exhibit its performance capabilities,
we recommend using the optional PS-60 (22.5 A, 25% duty
cycle) power supply.
◆ Before connecting the DC power supply to the transceiver, be
sure to switch the transceiver and the DC power supply OFF.
◆ Do not plug the DC power supply into an AC outlet until you
make all connections.
FIXED STATION OPERATION
In order to use this transceiver for fixed station operation,
you will need a separate 13.8 V DC power supply (not
included). The recommended current capacity of your
power supply is 14 A or more.
1 Connect the DC power cable to the regulated DC
power supply and ensure that the polarities are correct
(Red: positive, Black: negative).
• Do not directly connect the transceiver to an AC outlet.
• Use the supplied DC power cable to connect the
transceiver to a regulated power supply.
• Do not substitute a cable with smaller gauge wires.
To AC outlet
Regulated DC
power supply
Black (–)
Red (+)
Fuse holder
Fuse holder