25
6
This function automatically selects an offset direction,
according to the frequency on the VHF band. The
transceiver is programmed for an offset direction as
shown below. To obtain an up-to-date band plan for
repeater offset direction, contact your national Amateur
Radio association.
K market version only
+−
−− +S
S
SS
144.0 145.5 146.4 147.0 147.6
145.1 146.0 146.6 147.4 148.0 MHz
S: Simplex
This complies with the standard ARRL band plan.
E market version only
S
S
S: Simplex
–
144.0 146.0 MHz145.8145.6
Note: Automatic Repeater Offset does not function when the
Reverse function is ON. However, pressing [REV] after Automatic
Repeater Offset has selected an offset (split) status, exchanges the
receive and transmit frequencies.
1 Press
[F], [MENU] and turn the Tuning control to
select Menu No. 11 (ARO).
2 Press
[MENU] and turn the Tuning control to switch
the function “ON” (default) or “OFF”.
3 Press
[MENU] to store the setting or any other key to
cancel.
4 Press any key other than [MENU] to exit Menu Mode.
TRANSMITTING A 1750 Hz TONECall Channel default settings:
• On E market models, pressing [CALL] causes the
transceiver to transmit a 1750 Hz tone.
• On K and M market models, pressing [CALL] changes the
transceiver to the Call Channel {page 35}.
To change the setting of the CALL key:
1 Press
[F], [MENU] and turn the Tuning control to
select Menu No. 19 (CK).
2 Press
[MENU] and turn the Tuning control to select
“CALL” or “1750”.
3 Press
[MENU] to store the setting or any other key to
cancel.
4 Press any key other than [MENU] to exit Menu Mode.
Some repeaters in Europe must receive continuous
signals for a certain period of time, following a 1750 Hz
tone. This transceiver is also capable of remaining in the
transmit mode for 2 seconds after transmitting the tone.
1 Press
[F], [MENU] and turn the Tuning control to
select Menu No. 20 (HLD).
2 Press
[MENU] and turn the Tuning control to select
“ON” or “OFF” (default).
3 Press
[MENU] to store the setting or any other key to
cancel.
4 Press any key other than [MENU] to exit Menu Mode.