29
7
The data listed below can be stored in each Memory
Channel:
ycneuqerfevieceR seY seY
ycneuqerftimsnarTseY
ycneuqerfenoTseYseY
NOenoTseYseY
ycneuqerfSSCTCseYseY
NOSSCTCseYseY
edoc
SCDseYseY
NOSCDseYseY
noitceridtesffOseYA/N
ycneuqerftesffOseYA/N
NOesreveRseYA/N
ezispetsycneuqerFseYseY
MFdnabworraNseYseY
tfihStaeBseYseY
tuokcollennahCyromeMseYseY
emanlennahCyromeMseYseY
Odd-Split
Parameter Simplex &
Repeater
Yes: Can be stored in memory.
N/A: Cannot be stored in memory.
Note:
◆ Memory Channel Lockout cannot be set to the Program Scan
Memory (L0/U0 ~ L2/U2), the Priority Channel (Pr), or the
Weather Alert Channel (AL).
◆ Tone, CTCSS, and DCS are automatically turned OFF when
setting up the Weather Alert Channel (AL).
STORING SIMPLEX FREQUENCIES OR STANDARD REPEATER FREQUENCIES1 Press [VFO].
2 Turn the
Tuning control to select your desired
frequency.
• You can also directly enter a desired frequency using the
keypad {page 13}.
3 If storing a standard repeater frequency, select the
following data:
• Offset direction {page 23}
• Tone function, if necessary {page 24}
• CTCSS/ DCS function, if necessary {pages 46, 48}
If storing a simplex frequency, you may select other
related data (CTCSS or DCS settings, etc.).
4 Press
[F].
• A Memory Channel number appears and blinks.
• “ ” appears if the channel contains data.