26 EN
Midnight mode (Dolby Digital mode only)
When watching movies at night , you might not be able to raise the
volume as loud as normal. Midnight mode compresses the dynamic
range of previously specified parts of the Dolby Digital sound track (like
scenes with sudden increases in volume) to minimize the difference in
volume between the specified and non-specified parts. This makes it
easy to hear all of the sound track, even when listening at low volumes.
1Press the SOUND key repeatedly until “NIGHT” appears on the
display.
•This can be selected only if CD/DVD, DVD/6CH or VIDEO 2 is
selected as the source and the listen mode is set to “DOLBY
DIGITAL.”
2Use the MULTI CONTROL knob or Joystick to select the ON or
OFF setting.
•The adjustment item is displayed for approximately 8 seconds.
•Some Dolby Digital software may not be compatible with the
Midnight mode.
Panorama mode (Pro Logic
II
Music mode only)
When listening to music, you will be able to enjoy the “wraparound”
sound effect when you adjust the panorama mode.
1Press the SOUND key repeatedly until “PANORAMA” appears on
the display.
•The PANORAMA setting indication scrolls across the display.
“PANORAMA” will be scrolled from right to left.
2Use the MULTI CONTROL knob or Joystick to select PANORAMA
ON or OFF.
1ON : PANORAMA mode is ON.
2OFF : PANORAMA mode is OFF.
Dimension mode (Pro Logic
II
Music mode only)
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
1Press the SOUND key repeatedly until “DIMENSION” appears on
the display.
•The DIMENSION indication scrolls across the display.
2Use the MULTI CONTROL knob or Joystick to adjust the
soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
Soundfield is in neutral position.
Soundfield is adjusted towards the rear.
Center Width mode (Pro Logic
II
Music mode only)
Center width adjustment allows you to enjoy an enchanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
1Press the SOUND key repeatedly until “CENTER WIDTH” appears
on the display.
•The CENTER WIDTH indication scrolls across the display.
•When the center speaker is switched OFF, this mode will not
be effective.
2Use the MULTI CONTROL knob or Joystick to adjust the left-
center-right output.
Center image will be heard from center speaker only.
Center image will be heard from left and right speakers only.
•When in other positions, center image from center speaker, left
and right speakers can be heard simultaneously with various
combinations.
Ambience effects
*5228/25-29/EN 14/06/2002, 12:04 PM26