Presetting radio stations manually
1Tune to the station you want to store.2Press the MEMORY key while receiving the station.Blinks for 20 seconds
Proceed to step 3 within 20 seconds.
(If more than 20 seconds elapse, press the MEMORY key again).
Receiving preset stations in order (P.CALL)
1Press the TUNER key to select tuner as the source.2Use the P.CALL 4¥¢ keys to select the desired station.•Each time you press the key, another preset station is received in order.
Pressing the P.CALL ¢ does the following:
3Use the MULTI CONTROL knob or MULTI CONTROL %/ fi keys to select one of the station presets (1 – 40).
4Press the MEMORY key again to confirm the setting.•Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.
•If you store a station at a previously used preset, the previous station will be replaced by the new one.
Pressing the P.CALL 4 does the following:
Holding down the P.CALL ¢ or 4 key, lets you skip through the presets, receiving each preset station at 0.5 second intervals.
Receiving preset stations
1Press the TUNER key to select tuner as the source.
2Enter the number of the preset station you want to receive (up to “40”).Press the Numeric keys in the following order:
For “15”, press ................................ | 0, 5 |
For “20”, press ................................ | 0, 0, ) |
•If you make a mistake entering a two digit number, press the +10 key repeatedly to return to the original display and start again.