Normal playback

Adjusting the Loudness mode (remote control only)

You can adjust the Loudness function which controls the low volume settings to maintain the music’s richness. The adjustment can be made when this model is in the PCM stereo and analog stereo mode.

Press the LOUDNESS key to turn the Loudness setting ON.

To cancel

Press the LOUDNESS key again so that the “LOUDNESS” indicator goes off.

Muting the sound

The MUTE key lets you mute the sound of the speakers.

Press the MUTE key.

To cancel

Press the MUTE key again so that the “MUTE” indicator goes off.

•MUTE ON can also be deactivated by turning the volume control knob.

ACTIVE EQ mode

You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON during Dolby Digital and DTS playback and, when in PCM and analog stereo mode.

Press the ACTIVE EQ key for the following selections;

1 ACTIVE EQ MUSIC : Effective when listening to music.

(The ACTIVE EQ LED indicator lights up.)

2ACTIVE EQ CINEMA : Effective when watching a movie.

 

 

(The ACTIVE EQ LED indicator lights up.)

3

ACTIVE EQ TV

: Effective when watching TV.

 

 

(The ACTIVE EQ LED indicator lights up.)

4

ACTIVE EQ OFF

: The ACTIVE EQ function is turned OFF.

 

 

(The ACTIVE EQ LED indicator goes off.)

•ACTIVE EQ function will not be available when REC MODE, AUTO TUNING or PRESET MEMORY is ON and during 96kHz LPCM playback.

Listening with headphones

1Press the SPEAKERS ON/OFF key so that the speaker indicator goes off.

Make sure the SP indicator is turned OFF.

•If you turn off all of the speakers when in surround mode, the surround mode will be canceled as well, resulting in stereo playback.

2Connect headphones to the PHONES jack.

PHONES

3Use the VOLUME CONTROL knob or VOLUME %/fi keys to adjust the volume.

Recording

Recording audio (analog sources)
Recording a music source

1Use the INPUT SELECTOR knob to select the source (other than “MD/TAPE”) you want to record.

2Set the MD or TAPE recorder to record.

3Start playback, then start recording.

Recording video

1Use the INPUT SELECTOR knob to select the video source (other than “VIDEO1”) you want to record.

2Set the video deck connected to VIDEO 1 to record.

• Select the REC mode to record a digital input source.

3Start playback, then start recording.

• Recording may not be normal for some video software. This is due to

the copy guard condition.º

Recording audio (digital sources)

Switch on the REC mode to record a digital input source.

Usually use the A-REC(Auto-Record) mode to record audio input sources. When the digital mode changes during recording in the A-REC mode, the audio input source may be interrupted momentarily.

Recording music in A-REC or M-REC mode

1Use the INPUT SELECTOR knob to select the source (CD/DVD, DVD or VIDEO2) you want to record.

2Set the MD or TAPE recorder to record.

20 EN