Normal playback

Listening to a source component

1Use the INPUT SELECTOR knob or Input Selector keys to select the source you want to listen to.

The input sources change as shown below:

1 “TUNER”

2“CD/DVD”

3“TAPE” or “MD”

4 “VIDEO1”

5 “VIDEO2”

6 “DVD”

7 “AUX”

2Start playback from the selected source.3Use the VOLUME CONTROL knob or VOLUME %/fi keys to adjust the volume.

Adjusting the sound

Adjusting the Tone (remote control only)

You can adjust the sound quality when this model is in the PCM stereo and analog stereo mode.

1Press the TONE key to select the Tone mode.

2Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to select TONE ON/OFF.

3When in TONE ON selection, press the TONE key for the following displays.

BASS : Select this to adjust the low frequency range.

TREB : Select this to adjust the high frequency range.

4Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to adjust the sound quality.

•The bass and treble levels are adjustable from -10 to +10 in 2 step increments.

One-touch low frequency emphasis (Bass Boost) (remote control only)

You can adjust the sound quality when this model is in the PCM stereo and analog stereo modes.

Press the BASS BOOST key.

•Press the key once to select the maximum (+10) low frequency emphasis setting.

•TONE will automatically be turned ON.

•This key does not function when this model is in the sound quality

or ambience effects adjustment mode.

£~•

Switching back to the previous setting

Press the BASS BOOST key again.

19 EN