Names and functions of parts

Main Unit

AUTO indicator

Speaker indicator

CLIP indicator

MUTE indicator

LOUDNESS indicator

TONE indicator

TUNED indicator

ST. indicator

Input channel indicators

*The Input channel indicators light up to indicate the channels contained in the input signal. The "S" indicator lights when the surround component consists of a single channel.

Frequency display,

Input display,

Preset channel display,

AUTO DETECT indicator

 

 

 

 

Surround mode display DIGITAL indicator

DSP MODE

 

 

 

 

 

 

 

 

Band indicators

indicator

 

 

 

 

 

 

 

 

 

 

DTS indicator

 

 

 

 

 

DISCRETE 6.1

 

 

 

 

 

indicator

 

 

DOLBY DIGITAL

 

MATRIX 6.1

 

 

 

indicator

NEO:6

indicator

 

 

 

 

 

 

 

 

PRO LOGIC

indicator

 

Display

 

indicator

 

 

 

 

 

 

1 POWER ON/STANDBY

 

key

^

 

 

Use to turn the power ON/STANDBY.

STANDBY indicator

 

2 DIMMER key

 

Use to select the REC MODE.

)

Use to adjust the brightness of the display.

 

3 LISTEN MODE key

∞

Use to select the listening mode.

4Surround LED (light-emitting diode) indicators

ACTIVE EQ mode LED indicator

)

Lights when this model is in the ACTIVE EQ

mode.

 

DTS mode LED indicator

∞

Lights when this model is in the DTS mode.

DOLBY DIGITAL mode LED indicator

∞

Lights when this model is in the Dolby Digital mode.

5 SOUND key

$ AUTO/MONO key

 

Use to adjust the sound quality

and the

Use to change “TAPE” indication to “MD”.

ambience effects.

 

Use to select the auto tuning mode.

*

6 MULTI CONTROL knob

^

¡

Use to control a variety of settings.

 

% MEMORY key

™

7 INPUT SELECTOR knob

*

Use to store radio stations in the preset

Use to select the input sources.

 

memory.

 

8 VOLUME CONTROL knob

( ^ SETUP key

^

9 PHONES jack

)

Use to select the speakers' settings etc.

Use for headphone listening.

 

& MUTE key

)

0 SPEAKERS ON/OFF key

*

Use to temporarily mute the sound.

 

Use to turn the speakers ON/OFF.

 

 

 

! ACTIVE EQ key

)

 

 

Use to select ACTIVE EQ setting.

 

 

 

@ INPUT MODE key

8

 

 

Use to switch between full auto, digital and

 

 

analog inputs.

 

 

 

# BAND key

¡

 

 

Use to select the broadcast band.

Standby mode

While the standby indicator is lit, a small amount of power is supplied to the system to back-up the memory. This is called standby mode. Under the condition, the system can be turned ON by the remote control unit.

CAUTION

The power in this equipment will not be completely cut off from the AC wall outlet when the main switch is turned OFF.

6 EN