3Press and hold the DIMMER key for more than 2 seconds to select the
1 Rec mode off | : The digital input record mode is switched off. |
2 | : The digital input signals (DTS, Dolby Digital, |
| or PCM) are identified automatically and |
| converted into stereo signals that are ready |
| for recording. |
3
•When the
When the
For
For
4Start playback, then start recording.
•If the audio reproduction stops in the middle due to change in the input signals, etc., press the DIMMER key.
Listening to radio broadcasts
This model can store up to 40 stations in the memory and recall them by
Tuning radio stations
1Use the INPUT SELECTOR knob or TUNER key to select the tuner.2Use the BAND key to select the desired broadcast band.
Each press switches the band | “AM” or “FM” indicator | |
as follows: | appears in the display | |
| ||
1 | FM |
|
2 | AM |
|
3Use the AUTO/MONO key to select the desired tuning method.
Each press switches the tuning method as follows:
1AUTO lit (auto tuning)
2AUTO not lit (manual tuning)
“AUTO” indicator lights up in the display.
•Normally, set to “AUTO” (auto tuning). If the radio waves are weak and there is a lot of interference, switch to manual tuning. (With manual tuning, stereo broadcasts will be received in monaural.)
4Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys, or TUNING 1 / ¡ keys to select the station.
“ST.” lights when a broadcast |
|
is being received in stereo. | Frequency display |
“TUNED” is displayed when a station is received.
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob (press the key) to select the desired station.