Let's have sound 25
CHANNEL SPACE setting (Except for the U.S.A., Canada, U.K., Europe, and Australia)
The space between radio channels has been set to the one that prevails in the area to which the system is shipped. However, if the current channel space setting does not match the setting in the area where the system is to be used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by referring to the following table.
| Area | CHANNEL | ||
| SPACE freq. | |||
|
| |||
|
|
|
|
|
1 | USA, Canada and South | FM | : | 100 kHz |
| American countries | AM | : | 10 kHz |
2 | Other countries | FM | : | 50 kHz |
|
| AM : | 9 kHz | |
|
|
|
|
|
2While holding the TUNER (BAND) key de- pressed, turn the MULTI CONTROL jog dial to select the system mode.
| I CON | TR |
|
LT | O | ||
U |
|
| |
M |
|
| L |
1 “FM100/AM10 kHz” STEP, 
2 “FM 50 /AM 9 kHz” STEP,F M 1 0 0 / A M 1 0 | F M 5 0 / A M 9 |
⎟The “AM” display is variable depending on the model (country or area), and “MW” may be displayed in
some areas.
section Basic