Kenwood manual CD player

				In case of difficulty		55
Sound is harsh or high fre-	⎟	The head is dirty.	⎟	Clean the head referring to “Mainte-
quencies are not repro-				nance”.
duced.	⎟	The tape is stretched or shrunk.	⎟	Try another tape.	W
Sound is distorted.	⎟	The tape being played was recorded	⎟	Try another tape.
	⎟	with distorted sound.	⎟ Switch off the equalizer and 3D
		A tape which has been recorded with
		the equalizer and/or 3D surround		surround effects before starting
		effects is being played back by		playback.	y
		applying the equalizer effect.
Noise is noticeable.	⎟	The tape head is magnetized.	⎟	Demagnetize the head referring to	W
	⎟		⎟	“Maintenance”.
		External noise is induced.		Install the system at a distance from
	⎟ A tape which has been recorded with		⎟	other electric appliances and TV.
				Switch on the Tape Equalizer.
		Dolby NR is being played back with-			£
		out switching the Tape Equalizer.
Sound vibrates.	⎟	The capstans or pinch rollers are dirty.	⎟	Clean the head referring to “Mainte-
	⎟		⎟	nance”.	W
		The tape is wound irregularly.		Wind the tape again by fast forward-
				ing, rewinding or playing from an end
				to the other.	£
Recording cannot be started	⎟	The recording protect tab of the cas-	⎟	Use a cassette with an unbroken re-
by pressing the record key.		sette has been broken.		cording protect tab or block the hole.	5
	⎟ The cassette holder is not closed com-		⎟	Close the holder completely.
	⎟	pletely.	⎟ Select the source to be recorded with		™
		The TAPE input is selected.
				the CD, TUNER, or AUX key.	ª
	⎟	The tape is fully wound to one of the	⎟ Change the tape transport direction of
		reels.		deck B or reverse the tape insertion
				orientation.	•
CD player
Symptom		Cause		Remedy
A CD is placed in the player	⎟	The disc is placed upside down.	⎟ Place the disc properly, with the label
but it cannot be played.	⎟		⎟	side facing upward.	)
		The disc position is displaced.		Place the disc properly.	)
	⎟	The disc is extremely dirty.	⎟ Clean the disc referring to “Handling
	⎟		⎟	of discs and tapes”.	5
		The disc is scratched.		Try another disc.
	⎟	Dew is condensed on the optics lens.	⎟ Refer to “Caution on condensation”
				and remove the condensation by
				evaporation.	W
Sound is not produced.	⎟	The disc has not been placed.	⎟	Place a disc in the CD player.	)		Knowledge
	⎟ The player is not set to the play mode.		⎟	of discs and tapes”.	5
				Press the play key.	)
	⎟	The disc is extremely dirty.	⎟	Clean the disc referring to “Handling
	⎟	The disc is scratched.	⎟	Try another disc.			section
Sound skips.	⎟	The disc is dirty.	⎟	Clean the disc referring to “Handling
	⎟		⎟	of discs and tapes”.	5
		The disc is scratched.		Try another disc.
	⎟ The player was subjected to vibration.		⎟ Install the unit in a place not subject to
				vibrations.