Keys Fitness BS-9101 owner manual Sauna Operation, Preparation, Control Panel Function

15) Preparation

Plug the unit into a grounded (3-prong) outlet (120V 60Hz). The sauna is ready to be used. Read and follow all OPERATING INSTRUCTION.

SAUNA OPERATION

NOTE: Before powering on the sauna for the first time, please check and confirm the connection of all wiring (CONTROL BOX, HEATERS, TEMPERATURE SENSOR etc.) are correct and undamaged.

CONTROL PANEL FUNCTION

Figure 30

Power On /Off: Press to control the main power of the sauna unit.

Power indicator: Indicates the status of the sauna’s main power.

Work Start/Stop: Press to control the working functions of the sauna.

Work indicator: Indicate the working status of the sauna.

Heat indicator: Indicate the status of heating functions.

Light: Press to control the lighting function

Time Display: Display the heating time of the sauna in minute(s)

Time: Press to adjust the setting of the timer.

Temperature Display: Display the actual interior temperature of the sauna room in 0C/0F.

Temperature: Press to adjust the temperature setting

0C/0F: Press to change the temperature display between 0C or 0F.

1.MAIN POWER: Plug in the main power to your household power.

2.SAUNA POWER: To power on the sauna, press POWER ON/OFF one time on the inside control panel, POWER light should then light up, The TIME DISPLAY will flash 60. TEMPERATURE DISPLAY will flash 60. If you press POWER ON/OFF again, power is off, while everything goes out.

3.HEATING TIME: When power is on, press TIME “▲” or “▼” to increase or decrease the emitting time of sauna room. When you press one time, it increases or decreases 1 minute. If you press the