| Figure 3 |
MAIN POWER | main power of the sauna room |
HT1, HT2, | heaters power output cable |
READING LAMP | reading lamp power output cable |
CTRL PANEL | control panel connecting |
CD/SIG | signal cable group |
10) COMPONENT MARKINGS
For easy and proper installation, please read the information below thoroughly to make sure all connections are correct. (see form 1)
MARKING
POWER
FUSE
HT1, HT2
LIGHT
CTRL
L/SPEAKER
R/SPEAKER
BUZZER
TEMP SENSOR
COMPONENT CONNECTION
Power cord
Fuse (15A) (reset) Heater power cord Reading lamp connector Control panel connecting Left speaker plug Right speaker plug Buzzer plug Temperature sensor
Form 1
Please read the operating instructions carefully before assembly. 2 adults are required for the sauna installation.
The power cord is taken out of the TOP COVER, do not plug in power during installation.
Figure20 | Figure 21 |
11) Connect all the plugs on the TOP PANEL
1>. Plug in according to the respective label. (see figure
2>. Connect the CTRL plug from the CONTROL BOX and CTRL plug from the CONTROL PANEL, then screw
