Assembly
Figure 6
Attach Rear Cover to Main Frame using five M5*12mm Philip Head Screws removed in figure 3.
Note: Do not force Rear Cover back into place, this will damage Rear Cover.
Figure 7
Level machine so that no wobble is pres- ent. Leveler feet screw in and out to level machine. After machine is level, tighten leveler nut to secure levelers in place.
Figure 6 |
REAR COVER |
M5*12MM SCREW |
Figure 7 |
LEVELER |
CONGRATULATIONS!
You have completed assembly of your CG2 Elliptical
9
