Assembly
Figure 4
Attach Console Tube to Main Frame. Slide Tube down into Main Frame. Secure using three M8*50mm Hex Head Bolts. Cable should extend thru bottom and top of Console Tube.
Figure 5
Figure 4 |
Console Mast |
7PIN CONNECTOR |
M8*50mm Hex Bolt |
Connect 7 Pin, 3 Pin and Grounding cables.. Refer To Figure 5 and 5a.
Attach Console to Console tube using four M5*12mm Philip Head Screws.
Note: Ensure that all wires are secure inside console. Be careful not to pinch wires.
3 PIN |
| 7 PIN |
CONNECTOR |
| CONNECTOR |
|
|
|
Figure 5a
GROUNDING
TERMINALS
Figure 5 |
7 PIN |
CONNECTOR |
3 PIN |
CONNECTOR |
2 GROUND |
CONNECTORS |
CONSOLE |
CABLES |
8 |
