Assembly
Figure 8
Locate Console. Connect upper console wire and pulse wires to the appropriate location on the back of the console. Secure console to console tube using four screws. Note: The four console screws will already be installed into the back of console when you remove it from the box.
Figure 8 |
Figure 9
Locate bag labeled Figure 9. Connect the pulse wires coming from the pulse handle- bar assembly to the pulse wires from the console. Secure pulse handlebar assembly to console tube using six M6*10 hex socket head bolts. Insert toggle wire into the tog- gle jack located on the console tube. Note: Ensure that all wires are secure inside console tube. Be careful not to pinch wires.
Figure 9 |
|
| PULSE WIRE |
PULSE HANDLEBAR |
|
ASSEMBLY | TOGGLE WIRE |
| |
M6*10 HEX SOCKET BOLT | TOGGLE WIRE |
| JACK |
CONGRATULATIONS!
You have completed assembly of your
10
