Assembly
FIGURE 7
Step 1:
Insert the pulse wires (63) into the bigger opening on the upright tube and pull them out from the top of the upright tube (42). Attach the handlebar (55) to the handlebar post (42) with fixed screws (18) and washers (4).
Figure 7 63
42
55
4
18
FIGURE 8
Step 1:
Open the battery cover on the back of the console (54), and install 2 AA batteries.
Connect the male end of the extension wire (41) and the pulse cables (63) to the console (54). Attach console
(54)onto the upright post by sliding into place.
Figure 8
54
63
41
Congratulations!
You have completed assembly of your new HT440U Upright!
10
