Assembly
FIGURE 1
Step 1:
Attach front stabilizer (20) and rear stabilizer (2) to main frame (1) using carriage bolts (3), arc washers (4) and cap nuts (5).
Figure 1
20 | 4 5 |
3
5 4
5 4
4 5
2
3
FIGURE 2
Step 1:
Thread the right pedal (11) onto the right side of unit as shown in Figure 2. Tighten the
pedal securely. Secure in place by turning it clockwise to
tighten. Select the right pedal strap which has "R" marked on the botton side of the strap.
Snap one end onto the inside edge of the right pedal (11). Snap the other end onto out- side edge of the right pedal
(11). Select adjustment holes which allow your foot to be eas-
ily removed from the pedals.
Step 2:
Repeat step 1 for left side. Secure in place by turning it
counter-clockwise to tighten.
Figure 2
11
1
12
