Manuals / Keys Fitness / Fitness & Sports / Home Gym

Keys Fitness KF-1560 Assembly, Install a Plastic Washer 69 onto each side of the Long Foam Tube

Models: KF-1560

1 29

Download 29 pages 30.81 Kb

Page 15

Image 15

Assembly

Step 8

Install a Plastic Washer (69) onto each side of the Long Foam Tube (11).

Next, install Upholstered Roller Pad (27) onto each side of Long Foam Tube (11) and secure in place using Big Plug (68).

Repeat the above step for the Seat Pad Support (9).

Next, install Upholstered Roller Pad (27) onto each Foam Frame (12 & 13) and secure in place with Big Plug (68).

Figure 8

Page 15

Image 15

Keys Fitness KF-1560 owner manual Assembly, Install a Plastic Washer 69 onto each side of the Long Foam Tube

Contents

KF-1560 Owner’s Manual215-00113 10/06 Rev A Table of Contents REGISTRATION CARD Before You StartSAFETY PRECAUTIONS Important Safety InformationAssembly Assembly Assembly 100#101# Step AssemblyAssembly Slide Seat Pad Support Receptacle 1 onto Rear Base 3 and secure in place using three Nylon Locknuts 93, six Washers 91, and three BoltsStep Step AssemblyAssembly Slide one Weight Stack Bumper 62 down each Guide Rod 14. Next, slide the weight plates down the Guide Rods 14 in this order - five 15lb Plates 15, nine 10lb Plates 16, five 5lb Plates 17, and the Top Plate 18. For more information see Weight Stack Placement pgStep Step AssemblySecure the Shaft 19 in place using two Set Screws Secure the Shaft 21 in place using two Set ScrewsAssembly StepSlide Long Foam Tube 11 into the hole towards the lower part of the Main Upright 2. Slide the Shaft 44 into top of the Leg Extension Lever 8. Attach Leg Extension Lever Assembly Install Seat Pad 25 onto Seat Pad Support 9 using two Washers 91 and two Allen BoltsStep Repeat the above step for the Seat Pad Support AssemblyInstall a Plastic Washer 69 onto each side of the Long Foam Tube Step 8Assembly Steplocation of pulleys Step AssemblyAssembly Stepexact location of pulleys Assembly Connect Ab Strap 32 to Mid Pulley Cable 77 using one Gear HookStep Note Tighten all hardware securely AssemblyInstall Weight Shrouds 20, 99, 100 to each side of the Main Top Beam 4 using two Washers 91, two Spring Washers 89, and Allen Bolts 86 StepCongratulations You have completed the assembly of your new KF-1560 Assembly100% 100% 90% 95% 65% 100% Weight RatiosWeight Stack Sticker Placement 200 LB Stack250 LB Stack Cable View Top View Exploded View Description Parts ListKF-1560 Parts List Rev A Ref #KEYS FITNESS PRODUCTS, L.P LIFETIME WARRANTY Warranty InformationKeys Fitness Products, L.P 4009 Distribution Drive, Suite Garland, Texas Customer Service