Manuals / Keys Fitness / Fitness & Sports / Home Gym

Keys Fitness KF-1560 owner manual Assembly, Step

Models: KF-1560

1 29

Download 29 pages 30.81 Kb

Page 19

Connect Ab Strap (32) to Mid Pulley Cable (77) using one Gear Hook (37).

Assembly

Step 12

Connect Long Lat Bar (22) to the Chest Press Cable (76) using two Gear Hooks (37) and Short Chain (36).

Connect Ab Strap (32) to Mid Pulley Cable (77) using one Gear Hook (37).

Connect Short Lat Bar (23) to Mid Pulley Cable (77) using two Gear Hooks (37) and Long Chain (35).

Figure 12

19

Image 19

Keys Fitness KF-1560 owner manual Assembly, Step, Connect Ab Strap 32 to Mid Pulley Cable 77 using one Gear Hook

Contents

Owner’s Manual KF-1560215-00113 10/06 Rev A Table of Contents REGISTRATION CARD Before You StartSAFETY PRECAUTIONS Important Safety InformationAssembly Assembly 100# Assembly101# Step AssemblySlide Seat Pad Support Receptacle 1 onto Rear Base 3 and secure in place using three Nylon Locknuts 93, six Washers 91, and three Bolts AssemblyStep Step AssemblySlide one Weight Stack Bumper 62 down each Guide Rod 14. Next, slide the weight plates down the Guide Rods 14 in this order - five 15lb Plates 15, nine 10lb Plates 16, five 5lb Plates 17, and the Top Plate 18. For more information see Weight Stack Placement pg AssemblyStep Step AssemblySecure the Shaft 19 in place using two Set Screws Secure the Shaft 21 in place using two Set ScrewsStep AssemblySlide Long Foam Tube 11 into the hole towards the lower part of the Main Upright 2. Slide the Shaft 44 into top of the Leg Extension Lever 8. Attach Leg Extension Lever Install Seat Pad 25 onto Seat Pad Support 9 using two Washers 91 and two Allen Bolts AssemblyStep Repeat the above step for the Seat Pad Support AssemblyInstall a Plastic Washer 69 onto each side of the Long Foam Tube Step 8Step Assemblylocation of pulleys Step AssemblyStep Assemblyexact location of pulleys Connect Ab Strap 32 to Mid Pulley Cable 77 using one Gear Hook AssemblyStep Note Tighten all hardware securely AssemblyInstall Weight Shrouds 20, 99, 100 to each side of the Main Top Beam 4 using two Washers 91, two Spring Washers 89, and Allen Bolts 86 StepCongratulations You have completed the assembly of your new KF-1560 Assembly100% 100% 90% 95% 65% 100% Weight Ratios200 LB Stack Weight Stack Sticker Placement250 LB Stack Cable View Top View Exploded View Description Parts ListKF-1560 Parts List Rev A Ref #KEYS FITNESS PRODUCTS, L.P LIFETIME WARRANTY Warranty InformationKeys Fitness Products, L.P 4009 Distribution Drive, Suite Garland, Texas Customer Service