Manuals / Keys Fitness / Fitness & Sports / Home Gym

Keys Fitness KF-1560 owner manual Assembly, Step

Models: KF-1560

1 29

Download 29 pages 30.81 Kb

Page 9

Image 9

Slide Seat Pad Support Receptacle (1) onto Rear Base (3) and secure in place using three Nylon Locknuts (93), six Washers (91), and three Bolts (80).

Assembly

Step 2

Slide Seat Pad Support Receptacle (1) onto Rear Base (3) and secure in place using three Nylon Locknuts (93), six Washers (91), and three Bolts (80).

Connect Front Upright (5) onto Seat Pad Support Receptacle (1) and secure together using two Nylon Locknuts (93), four Washers (91), and two Bolts (79).

Figure 2

Page 9

Image 9

Keys Fitness KF-1560 owner manual Assembly, Step

Contents

KF-1560 Owner’s Manual215-00113 10/06 Rev A Table of Contents REGISTRATION CARD Before You StartSAFETY PRECAUTIONS Important Safety InformationAssembly Assembly Assembly 100#101# Step AssemblyAssembly Slide Seat Pad Support Receptacle 1 onto Rear Base 3 and secure in place using three Nylon Locknuts 93, six Washers 91, and three BoltsStep Step AssemblyAssembly Slide one Weight Stack Bumper 62 down each Guide Rod 14. Next, slide the weight plates down the Guide Rods 14 in this order - five 15lb Plates 15, nine 10lb Plates 16, five 5lb Plates 17, and the Top Plate 18. For more information see Weight Stack Placement pgStep Secure the Shaft 19 in place using two Set Screws AssemblySecure the Shaft 21 in place using two Set Screws StepAssembly StepSlide Long Foam Tube 11 into the hole towards the lower part of the Main Upright 2. Slide the Shaft 44 into top of the Leg Extension Lever 8. Attach Leg Extension Lever Assembly Install Seat Pad 25 onto Seat Pad Support 9 using two Washers 91 and two Allen BoltsStep Install a Plastic Washer 69 onto each side of the Long Foam Tube AssemblyStep 8 Repeat the above step for the Seat Pad SupportAssembly Steplocation of pulleys Step AssemblyAssembly Stepexact location of pulleys Assembly Connect Ab Strap 32 to Mid Pulley Cable 77 using one Gear HookStep Install Weight Shrouds 20, 99, 100 to each side of the Main Top Beam 4 using two Washers 91, two Spring Washers 89, and Allen Bolts 86 AssemblyStep Note Tighten all hardware securelyCongratulations You have completed the assembly of your new KF-1560 Assembly100% 100% 90% 95% 65% 100% Weight RatiosWeight Stack Sticker Placement 200 LB Stack250 LB Stack Cable View Top View Exploded View KF-1560 Parts List Rev A Parts ListRef # DescriptionKEYS FITNESS PRODUCTS, L.P LIFETIME WARRANTY Warranty InformationKeys Fitness Products, L.P 4009 Distribution Drive, Suite Garland, Texas Customer Service