Manuals / Keys Fitness / Fitness & Sports / Home Gym

Keys Fitness KF-1560 owner manual Assembly, Step

Models: KF-1560

1 29

Download 29 pages 30.81 Kb

Page 14

Image 14

Install Seat Pad (25) onto Seat Pad Support (9) using two Washers (91) and two Allen Bolts (83).

Assembly

Step 7

Install Seat Pad (25) onto Seat Pad Support (9) using two Washers (91) and two Allen Bolts (83).

Slide the Seat Pad Support assembly (9) into Seat Pad Support Receptacle (1) and secure with Locking Pop Pin.

Install Back Pad (26) to Back Pad Support (10) using two Allen Bolts (83) and two Washers (91). Slide the Back Pad Support assembly (10) into the Main Upright (2) and secure with Locking Pop Pin.

Figure 7

Page 14

Image 14

Keys Fitness KF-1560 Assembly, Step, Install Seat Pad 25 onto Seat Pad Support 9 using two Washers 91 and two Allen Bolts

Contents

215-00113 10/06 Rev A KF-1560Owner’s Manual Table of Contents Before You Start REGISTRATION CARDImportant Safety Information SAFETY PRECAUTIONSAssembly Assembly 101# Assembly100# Assembly StepStep AssemblySlide Seat Pad Support Receptacle 1 onto Rear Base 3 and secure in place using three Nylon Locknuts 93, six Washers 91, and three Bolts Assembly StepStep AssemblySlide one Weight Stack Bumper 62 down each Guide Rod 14. Next, slide the weight plates down the Guide Rods 14 in this order - five 15lb Plates 15, nine 10lb Plates 16, five 5lb Plates 17, and the Top Plate 18. For more information see Weight Stack Placement pg Secure the Shaft 21 in place using two Set Screws AssemblySecure the Shaft 19 in place using two Set Screws StepSlide Long Foam Tube 11 into the hole towards the lower part of the Main Upright 2. Slide the Shaft 44 into top of the Leg Extension Lever 8. Attach Leg Extension Lever AssemblyStep Step AssemblyInstall Seat Pad 25 onto Seat Pad Support 9 using two Washers 91 and two Allen Bolts Step 8 AssemblyInstall a Plastic Washer 69 onto each side of the Long Foam Tube Repeat the above step for the Seat Pad Supportlocation of pulleys AssemblyStep Assembly Stepexact location of pulleys AssemblyStep Step AssemblyConnect Ab Strap 32 to Mid Pulley Cable 77 using one Gear Hook Step AssemblyInstall Weight Shrouds 20, 99, 100 to each side of the Main Top Beam 4 using two Washers 91, two Spring Washers 89, and Allen Bolts 86 Note Tighten all hardware securelyAssembly Congratulations You have completed the assembly of your new KF-1560Weight Ratios 100% 100% 90% 95% 65% 100%250 LB Stack Weight Stack Sticker Placement200 LB Stack Cable View Top View Exploded View Ref # Parts ListKF-1560 Parts List Rev A DescriptionWarranty Information KEYS FITNESS PRODUCTS, L.P LIFETIME WARRANTYGarland, Texas Customer Service Keys Fitness Products, L.P 4009 Distribution Drive, Suite