Manuals / Keys Fitness / Fitness & Sports / Home Gym

Keys Fitness KF-1560 owner manual Assembly, Step, Note Tighten all hardware securely

Models: KF-1560

1 29

Download 29 pages 30.81 Kb

Page 20

Image 20

Install Weight Shrouds (20, 99, 100) to each side of the Main Top Beam (4) using two Washers (91), two Spring Washers (89), and Allen Bolts (86 & 48).

Assembly

Step 13

Install Weight Shrouds (20, 99, 100) to each side of the Main Top Beam (4) using two Washers (91), two Spring Washers (89), and Allen Bolts (86 & 48).

Secure the bottom portion of the Weight Shrouds (20, 99, 100) to the Rear Frame (3) using two Washers (46) and two Allen Bolts (48).

Figure 13

Note: Tighten all hardware securely.

Page 20

Image 20

Keys Fitness KF-1560 owner manual Assembly, Step, Note Tighten all hardware securely

Contents

215-00113 10/06 Rev A KF-1560Owner’s Manual Table of Contents Before You Start REGISTRATION CARDImportant Safety Information SAFETY PRECAUTIONSAssembly Assembly 101# Assembly100# Assembly StepStep AssemblySlide Seat Pad Support Receptacle 1 onto Rear Base 3 and secure in place using three Nylon Locknuts 93, six Washers 91, and three Bolts Assembly StepStep AssemblySlide one Weight Stack Bumper 62 down each Guide Rod 14. Next, slide the weight plates down the Guide Rods 14 in this order - five 15lb Plates 15, nine 10lb Plates 16, five 5lb Plates 17, and the Top Plate 18. For more information see Weight Stack Placement pg Assembly Secure the Shaft 19 in place using two Set ScrewsSecure the Shaft 21 in place using two Set Screws StepSlide Long Foam Tube 11 into the hole towards the lower part of the Main Upright 2. Slide the Shaft 44 into top of the Leg Extension Lever 8. Attach Leg Extension Lever AssemblyStep Step AssemblyInstall Seat Pad 25 onto Seat Pad Support 9 using two Washers 91 and two Allen Bolts Assembly Install a Plastic Washer 69 onto each side of the Long Foam TubeStep 8 Repeat the above step for the Seat Pad Supportlocation of pulleys AssemblyStep Assembly Stepexact location of pulleys AssemblyStep Step AssemblyConnect Ab Strap 32 to Mid Pulley Cable 77 using one Gear Hook Assembly Install Weight Shrouds 20, 99, 100 to each side of the Main Top Beam 4 using two Washers 91, two Spring Washers 89, and Allen Bolts 86Step Note Tighten all hardware securelyAssembly Congratulations You have completed the assembly of your new KF-1560Weight Ratios 100% 100% 90% 95% 65% 100%250 LB Stack Weight Stack Sticker Placement200 LB Stack Cable View Top View Exploded View Parts List KF-1560 Parts List Rev ARef # DescriptionWarranty Information KEYS FITNESS PRODUCTS, L.P LIFETIME WARRANTYGarland, Texas Customer Service Keys Fitness Products, L.P 4009 Distribution Drive, Suite