Kicker 08WXRC manual Remote OFF, Off, To save the setting and return to the list of groups

PRESS &

HOLD

Once you select the LINK menu, a list of all 10 groups controlled by the WXRC will be displayed in a scrolling list. The list will either display the names you have created or the default names if you have not re-named them.

Use the  or  keys to scroll through the list of groups and press the key to select.

Use the  or  keys to select LINK ON or LINK OFF for the group.

When done selecting the current group’s Link property, press the  key to

MEM NAME MENU - Here you can change the default name of each of the four global memories

(memory-1to memory-4) to any 10 character name you want. Very useful for identifying a preset by its purpose (SPL, SOUND Q, ROCK, RAP, etc).

Use the  or  keys to scroll through the available memories (memory-1through memory-4)

When you have the memory selected that you want to name simply press the  key to select it.

save the setting and return to the list of groups.

You can now select another group to view or adjust by using the  or  keys and select it by pushing the  key.

OR

Press the  key to return to the GROUP AMPS menu and select another function.

You can now use the  and  keys to move the blinking cursor left or right to select which character you want to change.

Use the  and  keys to change the selected character. (A B C ...1 2 3 ...etc.)

When you are finished press and hold the  key for 1.5 seconds to save your new group name.

WXRC SETUP

PRESS &

HOLD

REMOTE VOL MENU - Here you can choose to have the selected group’s output level controlled by the Digital Remote Volume Control (DRVC).

If you wish to use the DRVC as a master volume control, raising and lowering the output level of all the amplifiers, select all the groups and set to them REMOTE ON. By default, all groups are set to

REMOTE OFF.

Use the  or  keys to scroll through the list of groups and press the  key to select.

SETUP	OFF	REMOTE
	Use the  or  keys to scroll through REMOTE ON and
WXRC	When done selecting the current group’s Remote Vol setting, press the  key

to save the setting and return to the list of groups.

WXRC NAME MENU - Here you can change the default name of the WXRC controller (-WXRC-) to any 10 character name you want. This is the name that scrolls in the DEFAULT menu.

Use the  and  keys to move the blinking cursor left or right to select which character you want to change.

Use the  and  keys to change the selected character. (A B C ...1

23 ...etc.)

When you are finished press and hold the  key for 1.5 seconds to save your new WXRC name. You are now back in the WXRC SETUP menu.

28 WXRCREMOTECONTROL

You can now select another Memory Name to re-name or press the  key to return to the WXRC SETUP menu.

AMP NAME MENU - Here you can change the default name of each WX Series amplifier to any 10 character name you want.

Use the  or  keys to scroll through the amplifiers connected to the

WXRC.

When you have the amplifier selected that you want to re-name simply press the  key to select it.

You can now use the  and  keys to move the blinking cursor left or right to select which character you want to change.

Use the  and  keys to change the selected character. (A B C ...1 2 3 ...etc.)

	PRESS &
When you are finished press and hold the  key for 1.5 seconds to save	HOLD

your new amplifier name.

You can now select another amplifier to re-name or press the  key to return to the WXRC SETUP menu.

29