Kicker 08WXRC, WXRC 9, 8, key is used to select that menu item. The key backs you up one menu level

MENUSYSTEM

WIRING

Now insert the removable power plug into the WXRCInterface Box. You should have something

resembling this picture at this point. The Control Head plugged in and the power plug wired correctly

and plugged in.

TO WXRC

PS2 Communication

Network Jack

DIN

5-Meter 6-pin DIN Cable

1-Meter 6-pin DIN Cable

WXRCNetwork Cables

Now we can run the Network Cables from the WXRC Interface Box to your WX Series amplifiers to

create the WXRC Communications Network.

Run the supplied 5-meter Network

Cable from the Interface Box to the

REMOTE IN jack of your first WX

Series amplifier.

Run the supplied 2-meter Network

Cable from the first WX Series

amplifier’s REMOTEOUT jack to the

REMOTEIN jack of the second

amplifier.

You can continue adding amplifiers (16

total) by following this setup and

supplying your own Network Cables.

The WXRC is supplied with 2 4-pin DIN

Network Cables, one 5-meter and one

2-meter. This is enough to connect 2

WX Series amplifiers to the WXRC

Interface Box. You can connect up to

16 WX Series amplifiers to the WXRC

by supplying additional cables.

If you need additional cables or need

to use custom lengths, you can

purchase pre-made 4-pin DIN

(S-Video) cables at any computer or

electronics store.

Navigation

Your KICKER WXRC uses the latest in microprocessor technologycontrol to provide you with

operational information about your amplifiers, full control over amplifier settings, global memory presets

and amplifier group control capability.

The menu system is designed in layers. There is a starting point and you simply keep drilling down

until you get to the menu item you want to view or change. This menu tree gives you an example of

how the WXRC menu structure is set up.

NOTE:Not all menus and menu items shown.

Navigating the menu structure is very easy using the 5-way keypad.

You use the and  keys to scroll through the available menu items. The

 key is used to select that menu item. The  key backs you up one menu level

from where you are,and the  key can return you all the way to MAIN MENU by

pressing and holding it for 1.5 seconds.

This is how you view information and change settings in your WXRCRemote Control.

∞

WXRCREMOTECONTROL