To help you identify which amp you are currently viewing simply press and hold the  key and the Remote Address of the amplifier will be displayed. This will aid you in determining which amp you are currently viewing when you have multiple amps of the same make.

Changing the amplifiers name (coming up later in the manual) will help you here. Once you have found the amplifier you wish to adjust simply press the  key to select it.

Once the amplifier you want to adjust is selected you will be able to choose from the following items. Some of these functions may not be available depending on if the amplifier is assigned to a Group and what LINK property the group has set. This is described in more detail in the WXRC SETUP menu.

As an example, if our center frequency is 100 HZ, a Q of .5 (area in gray) effects many more frequencies around 100 Hz than a Q of 10 (area in black) There is no right or wrong Q, you use whatever fits the needs of the system or personal taste. KICKER uses a default Q of 3.

Use the  and  keys to select your bandwidth (Q) value and press the  to save your setting and return to the frequency, boost, bandwidth options menu. You can now

select another equalizer option to adjust on this amplifier if desired.

Boost is where you boost the equalizer and has a range of+18 db in .5 dB steps. Keep in mind that

»GAIN

»EQ

»LO-PASS

»HI-PASS

»PHASE

»MUTE

»LIMITER

»GAIN RANGE

»NOISE GENERATOR

»REMOTE VOL

for every 3 dB of boost you are requiring the amplifier to use twice as much power in that equalized area. The default setting from KICKER is FLAT (No boost or cut).

Use the  and  keys to adjust your boost or cut and press the  key to save your setting and return to the FREquency,boost, bandwidth options menu. You can now select another equalizer option to

MENU SYSTEM

MENU SYSTEM

Use the  and  keys to scroll through the selections above and press the  key to select.

GAIN MENU - Here is where you adjust the selected amplifier’s gain controls. The WX Series amplifiers’ UltraMatch™ gain structure features both a digital input gain attenuator with Gain Ranges AND 12dB of “tweakable” Gain adjustment in each range! This super wide adjustment range allows WX amplifiers to operate flawlessly with any source unit, pre-amplifier, or line driver.

Now use the  and  keys to increase or decrease the gain of the selected channel(s) in .5 dB increments from 0 dB to +30 dB. (0.0 to 30.0)

When you are done adjusting the gain on this amplifier press the  key to return to the AMP ADJ menu and choose another function to adjust.

EQ MENU - Here is where you adjust the selected amplifier’s single band parametric equalizer.

Use the  and  keys to scroll through frequency, boost and bandwidth and then press the  key to select.

FREQUENCY selects the center frequency of the equalizer and can be set at 20 Hz to 200 Hz in 1 Hz

Steps.

Use the  and  keys to select your frequency. Press the  key to save your setting and return to the frequency, boost, bandwidth options

menu. You can now select another equalizer option to adjust on this amplifier if desired.

bandwidth (better known as Q) can be set from 0 to10 in .5 increments. In simple terms, lower Q effects more frequencies around the center frequency while higher Q effects fewer frequencies around the center frequency.

adjust on this amplifier if desired.

When you are done adjusting the equalizer on this amplifier press the  key while in the frequency, boost, bandwidth options menu to return to the

AMP ADJ menu and choose another function to adjust.

NOTE: While you are in the EQ menu the EQ indicator on the ISIS display is lit. This indicates you are making adjustments in the EQ menu.

lo-passMENU - Here is where you adjust the selected amplifier’s low pass crossover.

Use the  and  keys to scroll through frequency and slope and then press the  key to select.

FREQUENCY selects the crossover point and can be set at 20Hz to 200 Hz in 1 Hz steps.

Use the  and  keys to select your frequency. Press the  key to save your setting and return to the frequency and slope options menu. You

can now select another low pass crossover option to adjust on this amplifier if desired.

SLOPE selects the roll-off of the crossover and can be set from 6 dB to 48 dB in 6 dB Steps.

Use the  and  keys to select your low pass crossover slope. Press the  key to save your setting and return to the frequency and slope

options menu. You can now select another low pass crossover option to adjust on this amplifier if desired.

When you are done adjusting the low pass crossover on this amplifier press the  key while in the frequency and slope options menu to return to the

AMP ADJ menu and choose another function to adjust.

NOTE: While you are in the LO-PASS menu the LPF indicator on the ISIS display is lit. This indicates you are making adjustments in the LO-PASS menu.

12

WXRCREMOTECONTROL

13

Page 7
Image 7
Kicker 08WXRC manual » Gain, » Eq, Menu System, AMP ADJ menu and choose another function to adjust

08WXRC, WXRC specifications

The Kicker WXRC and 08WXRC series represent a blend of innovative audio engineering and rugged design, tailored specifically for passionate car audio enthusiasts. These subwoofers are designed to deliver deep, resonant bass that can transform any vehicle into a mobile sound stage.

One of the main features of the Kicker WXRC subwoofers is their custom, high-output woofer cone. Constructed with a durable injection-molded polypropylene, the cone not only ensures longevity but also enhances the clarity and punch of the sound produced. This design minimizes distortion and allows for a more powerful low-frequency output, providing listeners with the immersive experience they crave.

The technology behind the Kicker WXRC includes a high-temperature voice coil, which allows the subwoofers to handle increased power levels without overheating. This is crucial for users who enjoy playing their audio at loud levels, as it ensures reliability and performance throughout extended listening sessions. The dual voice coil configuration offers flexible wiring options, allowing the subwoofers to be easily integrated into various audio setups.

Another notable characteristic of the Kicker WXRC series is its robust enclosure design. The subwoofers are engineered to work optimally in a variety of enclosure types, including sealed or ported configurations, making them versatile for different sound preferences. The enclosures are often constructed with high-grade MDF for added durability and reduced resonance, ensuring that the sound remains clean and powerful.

The Kicker WXRC and 08WXRC subwoofers are also equipped with advanced cooling technologies. Their unique venting system allows air to flow freely over the voice coil, reducing the risk of thermal build-up during intense play. This means that users can enjoy high volumes without compromising the quality of their audio.

In terms of installation, the Kicker WXRC subwoofers come with a variety of mounting options, ensuring compatibility with a wide range of vehicles. Their sleek design and customizable features make them an attractive choice for anyone looking to upgrade their sound system.

Overall, the Kicker WXRC and 08WXRC subwoofers are designed to deliver exceptional bass performance in a reliable, robust package. With their impressive features, advanced technologies, and commitment to sound quality, these subwoofers stand out as a top choice for car audio enthusiasts seeking to elevate their listening experience.