WARNING —SAFETY FIRST

When installing and using this electrical equipment, basic safety precautions should always be followed, including the following:

•It is recommended that a licensed electrician or certified electrical contractor perform the electrical connections.

•DO NOT OPEN THE GENERATOR CONTROL PANEL – NOT A SERVICABLE UNIT.

•READ AND FOLLOW ALL INSTRUCTIONS.

•Disconnect all AC power before installation.

•WARNING – To reduce the risk of injury, do not permit children to use this product.

•Always adhere to all local and national regulatory installation requirements.

•The control panel must be mounted vertically on a flat surface and a minimum of 5 ft (1.5m) horizontal distance (or more, if local codes require) from the pool/spa.

•In Canada and some other regions, local codes require the unit be connected only to a circuit that is protected by a ground-fault circuit-interrupter (GFCI). The installer should provide this GFCI requirement. The GFCI should be tested on a regular basis by pushing the test button. If the GFCI fails to operate correctly, there is ground current flowing indicating the possibility of an electric shock. Do not use this unit. Disconnect unit and have a qualified professional correct the problem before using.

•The power cable must be hardwired to the time clock so that the system cannot operate without the pump.

•A build-up of flammable fumes can result in a hazardous condition if the cell is allowed to operate without flow. This machine must be operated only with an approved in-line flow sensor.

•The flow sensor must be installed immediately before the POOL FROG® Mineral Hybrid Cycler followed by the POOL FROG® Mineral Hybrid Cell.

•When cleaning the cell or adjusting pH, ALWAYS ADD ACID TO WATER, NEVER WATER TO ACID.

•SAVE THESE INSTRUCTIONS.