King Canada Mineral Hybrid 3

TABLE OF CONTENTS

Warning-Safety First	2
Introduction	4
Start-up	5
Adding Salt to the Pool	6
Inserting POOL FROG® Mineral Reservoir	7
Basic Operation	8
Controls	9
Easy Maintenance	10
POOL FROG® Mineral Hybrid Cell Cleaning	11
Winterizing	12
Troubleshooting	13-15
Saturation Index	16
Glossary	17
POOL FROG® Mineral Hybrid Cycler Parts List	18
Warranties	19-20

For information on King Technology’s entire product line, visit our website at www.kingtechnology.com

Contents

Page Page Page Part POOL FROG Mineral Hybrid Cycler Mineral Hybrid Generator Control Panel Minimum Ideal Maximum 1. BEFORE ADDING THE SALT 2. CALCULATING THE SIZE OF THE POOL Gallons Liters 3. ACCEPTABLE SALTS (POOL FROG® Mineral Reservoirs MUST be Replaced Every Season) POOL FROG Periodically test your water and always maintain the following readings IMPORTANT: OUTPUT LEVEL SALT To check the salt level If light number 7 is lit Replacing the Control Dial O-RingsKit Replacing Cap O-Ring Replacing Knob CAUTION: Always use protective eyewear and protective clothing Cleaning With Optional Cleaning Cap: tighten the screws on the electrical wires firmly.See cell wiring diagram Cleaning Without Optional Cleaning Cap: Page Page Page Page Page Total Alkalinity Stabilizer (cyanuric acid) New Pool Water Saturation Index Page POOL FROG Mineral Hybrid Cycler Two-YearLimited Warranty POOL FROG® Mineral Hybrid Generator Seven-YearLimited Warranty