King Controls 9754 operating instructions Satellite Configuration, Satellite Switching Mode

SECTION 4 SATELLITE CONFIGURATION

Note: Satellite re-configuration requires a King Controls Diagnostic Keypad #1844 not supplied with the antenna.

To configure your antenna for a different service, contact your local authorized King-Dome dealer or call King Controls at (800) 982-9920.

The King-Dome In-Motion Satellite System with integrated DVB (models 9754 and 9754-LP) can be configured to lock on a specific satellite, or auto switch between a pre-set pair of satellites.

The system is factory pre-set for basic DIRECTV service broadcast from the 101° W satellite. To configure the dish for other services, you will need to change the satellite switching mode and satellite service configuration as outlined below and on the next page.

SATELLITE SWITCHING MODE

You can change the operating mode to automatically switch between satellites 110/119 for Dish Network, and 101/110/119 for DIRECTV as follows:

Switching Mode	Satellite Service	Satellites
16	DIRECTV Plus	a. (satellites 101, 119)
		b. (satellites 101, 110, 119 HDTV*)
26	DISH 500 (SW21 switch)	(satellites 110, 119)
02	Single satellite mode	(manual switching)

* Note: Requires optional HD converter accessory purchased separately.

1.Unplug the controller and plug in the Diagnostic Keypad.

2.Press ON.

3.Press * 46 # to display the current satellite switching mode.

4. To change the satellite switching mode, press * 96 # * 66 # * 88 #

1844

Diagnostic Keypad

5.Press the UP and DOWN arrows (2 and 8 keys) to choose the desired switching mode.

6.Press * 47 # to lock in setting.

7.Turn unit OFF and back ON to save setting.

8.Press * 46 # to display code for new satellite switching mode.

Page 12