SECTION 5 STATIONARY OPERATION
IMPORTANT: There must be a clear “line of sight” to the southern sky. Mountains, buildings, trees, telephone poles, etc. can all block the satellite signal from reaching the dish.
The distance driven since last performing a search may affect how long it takes for the
Satellite TV and receiver technology are constantly changing. If you experience difficulty go to www.kingcontrols.com or contact the King Controls Service Department at
(800)
1.Turn on TV and Receiver. “Searching for Satellite” or similar will appear on TV screen.
2.On King Dome controller, press and hold ON/SEARCH for 3 FULL SECONDS.
Power light turns steady GREEN.
STATUS LIGHT | SYSTEM STATUS |
flashes a variety of colors | unit performs |
for about 30 seconds |
|
search in progress | |
potential satellite found | |
flashing RED again) |
|
satellite(s) found and search is complete |
3.If the status light is steady GREEN, and your programming does not appear, press the reset button on your DIRECTV receiver. If using Dish Network, hold the receiver power button in for 10 seconds to reset your receiver. Consult your receiver owner’s manual for further details.
4.When receiver reset is complete, select a channel or the program guide to view your programming. Turn off the
Note: If you are using the automatic satellite switching feature, you must leave the
Page 14
