DOOR FEATURES
Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the
Tilt-out FreezerDoor Bin
(on some models)
To Remove and Replace the Bin:
1.Remove the bin by pulling out on the tabs behind the basket to release it from the door liner.
2.Replace the bin by aligning the tabs with the buttons on the sides of the door liner. Firmly snap the tabs onto the buttons as shown.
Drop-in DoorRails
To Remove and Replace the Rails:
1.Remove the rails by pulling straight up on each end of the rail.
2.Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops.
Can Racksand Door Bins
(on some models)
NOTE: Can racks may be purchased as an Accessory for some models.
To Remove and Replace the Racks/Bins:
1.Remove the rack/bin by lifting it and pulling it straight out.
2.Replace the rack/bin by sliding it in above the desired support and pushing it down until it stops.
Snap-on Freezer Door Bin
(on some models)
The door bin may be removed for easier cleaning.
To Remove and Replace the Bin:
1.Remove the door bin by pushing in slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end of the door bin.
2.Replace the door bin by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket and rail assembly onto the tabs above the shelf as shown.
DoorAir Control
The door air control is located on the
A 
A. Door chill control
■Slide the door air control to the left to reduce the flow of cold air to the bin or can rack and make it less cold.
■Slide the door air control to the right to increase the flow of cold air to the bin or can rack and make it colder.
20
