Tools and materials needed for installation:

tubing cutter

bucket or pan

Electrical requirements

Electrical Shock Hazard

l Electrical ground is required on this appliance.

l If cold water pipe is interrupted by plastic, non-metallic gaskets or other insulating materials, Do Not use for grounding.

l Do Not ground to a gas pipe.

l Do Not modify the power supply cord plug. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

l Do Not have a fuse in the neutral or grounding circuit. A fuse in the neutral or grounding circuit could result in electrical shock

l Do Not use an extension cord with this appliance.

l Check with a qualified electrician if you are in doubt as to whether this appliance is properly grounded.

Failure to follow these instructions could result in serious injury or death.

Water supply requirements

Important: If local codes do Not permit the use of saddle valves, special feed valves can be obtained from your local plumbing supply distributor.

If local codes permit, the hot water dispenser feed line should be connected to the cold water supply line using a saddle tapping valve. The saddle tapping valve supplied is designed for use with 3/8” to l-318” outer dimension (O.D.), soft copper supply tubing (plain or chrome plated) and rigid metal pipe. Do Not use saddle valve with flexible ribbed supply tubing. Flexible ribbed supply tubing has a thin wall thickness and requires special connection hardware, available from your local plumbing supply distributor.

NOTE:

Connection to hot water line is not recommended. Energy will be wasted in heating the water twice and the magnesium rod used in household heating may produce a “rotten egg” taste.

If this unit is replacing a hot water dispenser connected to a hot water supply, the existing connection may be

9/l 6”, 7/l 6” and Ii2 open-end wrenches

l/4” O.D. copper tubing

pencil

2 mounting bracket screws (and 2 plastic anchors if attaching to dry wall)

If codes permit and a separate grounding wire is used, it is recommended that a qualified electrician determine that the grounding path is adequate.

For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong grounding- type wall receptacle, grounded in accordance with National Electrical Code, ANSVNFPA 70-latest edition* and all local codes and ordinances. (See Figure 1.) If a mating wall receptacle is not available, it is the personal responsibility and

used.

Parts supplied for installation:

4 saddle

tank bracket

, brass insert

obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.

Copies of the standard listed may be obtained from:

l National Fire Protection Association

Batterymarch Park

Quincy, Massachusetts 02269

3-pron

groun ci!mg-type wall receptacle

8

-62

2 square nuts

cord

Figure 1

faucet assembly

Remove parts from packages. Check that all parts were included.

Panel B

Page 2 Page 4
Page 3
Image 3
KitchenAid 3184330 Tools and materials needed for installation, Parts supplied for installation, Panel B
Page 2 Page 4

3184330 specifications

The KitchenAid 3184330 is a high-quality replacement part designed specifically for KitchenAid stand mixers. This essential component is known for its exceptional durability and compatibility, making it a popular choice among culinary enthusiasts and home bakers alike. Understanding its features and technologies can help users appreciate the advantages it brings to their kitchen.

One of the standout features of the KitchenAid 3184330 is its sturdy construction. Made from premium materials, it is designed to endure the rigorous demands of mixing, kneading, and whipping various ingredients. This robustness ensures that the part remains reliable over extensive use, providing consistent performance that users can count on.

Another notable characteristic is its precision engineering. The KitchenAid 3184330 is designed to fit seamlessly with a variety of KitchenAid stand mixer models. This compatibility extends to several series, allowing for a broader range of applications and ensuring that users can find the right match for their mixer. Its easy installation process further enhances user convenience, as it often requires no special tools.

In terms of technology, the KitchenAid 3184330 incorporates innovative design elements that enhance functionality. This includes features such as improved grip textures and user-friendly shapes that make handling and maneuvering the mixer easier during food preparation. Such thoughtful design considerations are crucial for ensuring a smooth mixing experience, allowing users to focus on their culinary creations.

Additionally, the KitchenAid 3184330 is designed with safety in mind. The materials used are often non-toxic and food-safe, aligning with modern kitchen standards. This reliability is essential for peace of mind in the kitchen, where food safety is a priority for every cook.

In conclusion, the KitchenAid 3184330 is more than just a replacement part; it embodies the dedication to quality and user satisfaction that the KitchenAid brand is known for. With its combination of durability, compatibility, thoughtful design, and safety features, this part is ideal for anyone looking to maintain their KitchenAid stand mixer in peak condition. Whether you’re whipping up a batch of cookies or kneading bread dough, the KitchenAid 3184330 is an essential tool that helps turn cooking inspirations into delicious realities.
Top Page Image Contents