Operating the hand blender
Using the LED display panel
IMportant: The unlock button must be pressed before the Hand Blender will operate.
LED display
1 | When operating the controls on the |
Hand Blender, always make sure the |
LED display is facing toward you. Grip the handle with your thumb on the back of the unit, and your fingers on the controls in front, as shown.
Battery life
indicator
Unlock |
button |
2 | The bottom bar on the LED display |
panel is the battery life indicator. Hold |
the Hand Blender so that you can see the LED display light up when you press the UNLOCK button with your index finger.
English
Speed control
buttons
Speed selection
indicator
3 | The top bar on the LED display panel is |
the speed selection indicator. To adjust |
speeds, operate the arrow buttons with your index finger, while viewing the speed indicator on the LED display. When the LED faces you, the right button will increase the speed and the left button will decrease the speed.
Pulse button
4 | After selecting desired speed, press |
the PULSE button to begin blending. |
See “Using the blending arm” section for more information.
NOTE: The Hand Blender will automatically power down after 60 seconds of not operating or being manually unlocked.
11
