Installer checkoff list:
COOKTOP
✓Cooktop correctly positioned in countertop cutout.
✓Maintained specified distances to cabinet surfaces.
✓Cooktopto side. level – front to back – side
✓Burner caps positioned properly on sealed burner bases.
✓All packing material removed.
✓Backguard or island trim attached (see page 4).
ELECTRICAL
✓Polarized and grounded
GAS SUPPLY
✓Connection: 1/2" NPT with a minimum 5/8" (15.9 mm) diameter flex line.
✓The cooktop is connected only to type of gas for which it is certified for use.
If cooktop does not operate:
✓Check that the circuit breaker is not tripped or the house fuse blown.
✓Check that the power supply cord is plugged into the outlet.
✓Check that gas valves are turned to the “ON” position.
✓See Use and Care Guide for troubleshooting list.
If you need assistance:
The KitchenAid Consumer Assistance Center will answer any questions about operating or maintaining your cooktop not covered in the Installation Instructions. The KitchenAid Consumer Assistance Center is open 24 hours a day, 7 days a week. Just dial
When you call, you will need the cooktop model number and serial number. Both numbers can be found on the model/serial rating plate located on the bottom of the cooktop and are visible through the cutout in the
If you need service:
In the event that your KitchenAid appliance should need service, call the dealer from whom you purchased the appliance or a
— Major — Service and Repair.”
You can also obtain the service company's name and number by dialing, free within the continental United States, the KitchenAid Customer Interaction Center telephone number,
Maintain the quality built into your KitchenAid appliance — call a
Maintenance
If removing the cooktop is necessary for maintenance, shut off gas supply. Disconnect the gas and electric supply. After disconnecting the gas and electric supply, finish removing the cooktop. Generally, the cooktop does not need to be removed for servicing.
9
