KitchenAid 9741159 installation instructions Failure to do so could result in electrical shock

Models: 9741159

1 8
Download 8 pages 11.51 Kb
Page 7
Image 7
Failure to do so could result in electrical shock.

channel

access oanels now, if you plan to do so. hollow detailed instructions provided on back cover. Check door operation with either the panels provided or custom panels. Door should close easily without slamming and should not open with its own weight. If door closes too fast from an open position, close door and adjust door spring brackets upward to a different hole. If door falls open too quickly, close door and move spring brackets downward.

Electrical Shock Hazard Disconnect power before making electrical connection.

Failure to do so could result in electrical shock.

Remove terminal box cover. Install conduit connector to box. Insert power cable through grommet. Connect the white wire of the power supply cable to the white leads in the terminal box with twist-on wire connectors. Connect the black wire of the power supply cable to the black leads in the terminal box with twist-on wire connectors.

Connect the grounding wire of the power supply cable to the grounding screw on the dishwasher frame.

Replace terminal box cover.

Page 7

Remove all shipping materials. Do Not

remove the white plastic plug buttons from the side of door or the plastic bumpers from the front corners of the lower rack. Do Not remove the two spring retainers attached to the heater (not included on all models.)

Take a few minutes to read the Use and Care Guide to fully understand your new

dishwasher.

Check that all parts have been installed and

no steps were skipped. Check that you have all tools you started with.

CHECK ELECTRICAL

REQUIREMENTS. BE

SURE YOU HAVE CORRECT ELECTRICAL SUP.PLY AND RECOMMENDED GROUNDING METHOD. Turn on electrical supply. Turn on water supply.

Start dishwasher and allow it to complete a

cycle. Check that dishwasher is working properly and that there are no water leaks.

Install top of access oanel into channel and

rotate panel’towards dishwasher. Reattach the access panel with two screws. Check that the opening at the bottom of access panel is clear so air can circulate to cool motor.

If color of door is to be changed or custom

panel installed, change the panel now. See Use and Care Guide for Instructions.

To get the most efficient use from your new dishwasher, read your KitchenAid Use and Care Guide. Keep Installation Instructions and Guide close to dishwasher for easy reference.

Page 7
Image 7
KitchenAid 9741159 installation instructions Failure to do so could result in electrical shock