Electronic Ignition System

Initial lighting and gas flame adjustments

Cooktop and oven burners use electronic igniters in place of standing pilots. When the cooktop control knob is turned to the “LITE” position, the system creates a spark to light the burner. This sparking continues, as long as the control knob is turned to “LITE.”

The flame can be adjusted using the adjustment screw in the center of the valve stem. The valve stem is located directly underneath the control knob.

Check Operation of Cooktop Burners

Push in and turn each control knob to the “LITE” position.

The flame should light within 4 seconds. The first time a burner is lit it may take longer than 4 seconds to light because of air in the gas line.

If burners do not light properly:

■Turn cooktop control knob to the “OFF” position.

■Check that the range is plugged in and the circuit breaker has not tripped or the fuse has not blown.

■Check that the gas shutoff valves are set to the “open” position.

■Check that burner caps are properly positioned on burner bases.

Repeat start-up. If a burner does not light at this point, contact your dealer or authorized service company for assistance.

Adjust Flame Height

Adjust the height of top burner flames. The cooktop “low” burner flame should be a steady blue flame approximately ¼" (0.64 cm) high.

A

A

A. Adjustment screw

If the “low” flame needs to be adjusted:

1.Remove the control knob.

2.Hold the knob stem with a pair of pliers. Use a small flat- blade screwdriver to turn the screw located in the center of the control knob stem until the flame is the proper size.

3.Replace the control knob.

4.Test the flame by turning the control from “LO” to “HI,” checking the flame at each setting.

Check Operation of Oven Element

1.Turn oven selector to BAKE. Default temperature appears in the temperature display.

2.Press ENTER. The first preheat light comes on when the oven temperature begins to rise.

3.When the second preheat light comes on, open oven door and hold hand above oven floor and feel for heat. Do not touch oven floor. Press CANCEL and turn oven selector to

RESET.

B

A.Low flame

B.High flame

Check Operation of Oven Broil Element

1.Close the oven door.

2.Turn oven selector to BROIL. “HI” will appear in the temperature display.

3.Press ENTER. Look through oven window. The top element should glow red, and heat should be radiating out of the door. Press CANCEL and turn oven selector to RESET.

If oven does not operate:

■Check that power supply is turned on.

■Check that the range is plugged in and the circuit breaker has not tripped or the household fuse has not blown.

Repeat start-up. If the oven still does not operate at this point, contact your dealer or authorized service company for assistance.

Install Burner Grates

Place burner grates over burner caps. The simmer plate may sit on one of the grates or be stored for future use.

12

Page 11 Page 13
Page 12
Image 12
KitchenAid 9759121A installation instructions Electronic Ignition System
Page 11 Page 13

9759121A specifications

The KitchenAid 9759121A is a highly versatile stand mixer attachment that enhances the functionality of your KitchenAid stand mixer, making it an essential tool for home chefs and baking enthusiasts alike. This attachment is specifically designed to expand the capabilities of your mixer, allowing for an array of culinary creations.

One of the standout features of the KitchenAid 9759121A is its ability to produce fresh pasta conveniently at home. This attachment typically includes different pasta-making components that allow users to create a variety of pasta shapes, including fettuccine, pappardelle, and spaghetti. The design ensures that the pasta dough is uniformly rolled and cut, resulting in a consistent texture and thickness that is crucial for achieving perfect pasta dishes.

The attachment is constructed with durable materials that ensure longevity and performance. It is compatible with a wide range of KitchenAid stand mixer models, making it a versatile addition to any kitchen. Its intuitive design means it can be easily attached and detached from the mixer, allowing for seamless integration into your cooking process.

In addition to pasta making, the KitchenAid 9759121A may include various accessories that can enhance its utility, such as different cutters and rollers, giving users even more options for their culinary creations. The ease of cleaning is another key feature; many components are dishwasher safe, which simplifies the cleanup process after a baking session.

Moreover, the attachment often emphasizes precision and consistency, which is essential when you are trying to replicate your favorite recipes. The ability to control the thickness of the pasta allows for customization to suit personal preferences and dietary needs, whether you're making lasagna sheets or delicate ravioli.

The KitchenAid 9759121A stands out not just for its functionality, but also for its ability to inspire creativity in the kitchen. Its combination of design, ease of use, and durability makes it a valuable addition to any home chef's toolkit. With this attachment, the possibilities for homemade pasta and other culinary delights are virtually endless. Whether you’re an experienced cook or a beginner, the KitchenAid 9759121A can elevate your cooking experience and enhance the quality of your meals.
Top Page Image Contents