Mobile Home - Additional Installation Requirements
The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.
In Canada, the installation of this range must conform with the current standards
Mobile home installations require:
■When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above.
Product Dimensions
A
G
Installation Clearances
Cabinet opening dimensions shown are for 25" (64 cm) countertop depth, 24" (61 cm) base cabinet depth and 36" (91.4 cm) countertop height.
O
M*
N
L
K
A
J
I
B
H
B
C
D E
C
G
F
F
D
E*
A. Backguard (required for some installations) B. 45" (114.3 cm) overall height
C. 36" (91.4 cm) cooktop height with feet loosened ¾ turn
D. 30" (76.2 cm) width
E. 26½" (67.3 cm) width with control panel* F. ¼" (6.4 cm) spacer
G. 9¼" (23.5 cm) backguard height
*When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) countertop; front of oven door protrudes 1⁷⁄₈" (4.8 cm) beyond 24" (61 cm) base cabinet.
A. 18" (45.7 cm) upper cabinet to countertop B. 22" (55.9 cm)
C. Junction box to be located in this shaded area D. 4" (10.2 cm)
E. 20" (50.8 cm) F. 12" (30.5 cm) G. 5½" (14 cm)
H. Gas line opening to be located in this shaded area I. 3½" (8.9 cm)
J. 8" (20.3 cm) K. 30¼" (76.8 cm)
L. 4" (10.2 cm) min. clearance from both sides of range to side wall or other combustible material
M. For minimum clearance to top of range, see NOTE*. N. 30" (76.2 cm) min. upper cabinet width
O. 13" (33 cm) max. upper cabinet depth
*NOTE: 36" (91.4 cm) minimum when bottom of wood or metal cabinet is protected by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
42" (106.7 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
If installing a hood above the range, follow the hood instructions for dimensional clearances above the cooktop surface.
5
