Gas Pressure Regulator

The gas pressure regulator supplied with this range must be used. The inlet pressure to the regulator should be as follows for proper operation:

Natural Gas:

Minimum pressure: 6" (15.2 cm) WCP

Burner Input Rating - Altitude

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).

For elevations above 2,000 ft (609.6 m), ratings are reduced at a rate of 4% for each 1,000 ft (304.8 m).

Maximum pressure: 14" (35.6 cm) WCP

LP Gas:

Minimum pressure: 11" (27.9 cm) WCP

Maximum pressure: 14" (35.6 cm) WCP

Contact local gas supplier if you are not sure about the inlet pressure.

Gas Supply Pressure Testing

Line pressure testing above ½ psi gauge (14" WCP)

The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of

½psi (3.5 kPa).

Line pressure testing at ½ psi gauge (14" WCP) or lower

The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

INSTALLATION INSTRUCTIONS

Unpack Range

WARNING

Excessive Weight Hazard

Use two or more people to move and install range. Failure to do so can result in back or other injury.

1.Remove shipping materials, tape and protective film from range. Keep shipping pallet under range. Remove oven racks, grates and parts package from inside oven.

2.Remove the 2 screws on each side of the top of the bottom vent. Slide the vent down and pull toward you. Lay this part to the side to avoid scratching the stainless steel.

B

A

A. Bottom vent

B. Remove these screws.

3.Lay a piece of cardboard from side packing on the floor behind range. Using 2 or more people, firmly grasp each side of range. Lift range up about 3" (8 cm) and move it back until range is off shipping pallet. Set range on cardboard to avoid damaging floor.

Level Range

1.Move range close to the cabinet opening.

2.Place a rack in oven.

3.Place level on rack, first side to side, then front to back.

4.If the range is not level, adjust the feet up or down. Turn leveling leg sleeves to level range and to raise or lower range to the desired countertop height.

A

A. Leveling leg sleeve

NOTE: Oven must be level for satisfactory baking performance.

8

Page 7 Page 9
Page 8
Image 8
KitchenAid 9759121A installation instructions Installation Instructions, Unpack Range, Level Range
Page 7 Page 9

9759121A specifications

The KitchenAid 9759121A is a highly versatile stand mixer attachment that enhances the functionality of your KitchenAid stand mixer, making it an essential tool for home chefs and baking enthusiasts alike. This attachment is specifically designed to expand the capabilities of your mixer, allowing for an array of culinary creations.

One of the standout features of the KitchenAid 9759121A is its ability to produce fresh pasta conveniently at home. This attachment typically includes different pasta-making components that allow users to create a variety of pasta shapes, including fettuccine, pappardelle, and spaghetti. The design ensures that the pasta dough is uniformly rolled and cut, resulting in a consistent texture and thickness that is crucial for achieving perfect pasta dishes.

The attachment is constructed with durable materials that ensure longevity and performance. It is compatible with a wide range of KitchenAid stand mixer models, making it a versatile addition to any kitchen. Its intuitive design means it can be easily attached and detached from the mixer, allowing for seamless integration into your cooking process.

In addition to pasta making, the KitchenAid 9759121A may include various accessories that can enhance its utility, such as different cutters and rollers, giving users even more options for their culinary creations. The ease of cleaning is another key feature; many components are dishwasher safe, which simplifies the cleanup process after a baking session.

Moreover, the attachment often emphasizes precision and consistency, which is essential when you are trying to replicate your favorite recipes. The ability to control the thickness of the pasta allows for customization to suit personal preferences and dietary needs, whether you're making lasagna sheets or delicate ravioli.

The KitchenAid 9759121A stands out not just for its functionality, but also for its ability to inspire creativity in the kitchen. Its combination of design, ease of use, and durability makes it a valuable addition to any home chef's toolkit. With this attachment, the possibilities for homemade pasta and other culinary delights are virtually endless. Whether you’re an experienced cook or a beginner, the KitchenAid 9759121A can elevate your cooking experience and enhance the quality of your meals.
Top Page Image Contents