6.Replace the hinge side trims by inserting the notched end under the top trim first.

7.Tighten the two top trim screws.

To replace the base grille:

1.Open the refrigerator and freezer doors to 90°.

2.Place the lower clips in the openings in the metal panel.

3.Roll the grille up toward the refrigerator until it snaps into place.

1.Side Trims

2.Top Trim Screws

3.Door Panels

4.Filler Panels

Leveling Your Refrigerator

Your refrigerator has a front and rear roller at the base of the product on each side. All four rollers can be adjusted from the front of the product. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the instructions below:

1.Check the installation location to be sure that you have the proper clearance for the refrigerator. (See the “Space Requirements” section.)

2.Plug into a grounded 3 prong outlet.

3.Move the refrigerator into its final position.

4.Open the refrigerator and freezer doors to locate the leveling bolts at the left and right of the refrigerator base. If your refrigerator has a base grille, remove it (see “Base Grille” earlier in this section).

NOTE: The top bolt will adjust the rear of the refrigerator, and the bottom bolt will adjust the front of the refrigerator.

Base Grille

Style 1:

To remove the base grille:

1.Open the refrigerator and freezer doors 90°.

2.Remove screws from the base grille using a Phillips screwdriver.

Note: Do Not Remove Tech Sheet that is fastened behind the base grille.

To replace the base grille:

1.Open the refrigerator and freezer doors to 90°.

2.Position the base grille in front of the refrigerator and replace the screws.

Style 2:

To remove the base grille:

1.Open the refrigerator and freezer doors to 90°.

2.Grasp the grille with both hands.

3.Lift up and tilt the top of the grille toward you.

NOTE: Do not remove the Tech Sheet that is fastened behind the grille.

1.Rear Leveling Bolt

2.Front Leveling Bolt

5.Use a ¹⁄₂ in. (12.70 mm) socket wrench to adjust the leveling bolts. Turn the leveling bolt to the right to raise that side of the refrigerator or turn the leveling bolt to the left to lower that side. It may take several turns of the leveling bolts to adjust the tilt of the refrigerator.

NOTE: Be careful not to unscrew the leveling bolts too much when lowering the refrigerator. The bolt head will start to come away from the refrigerator when in the lowest position. If the screw does come out of the rear roller bracket, the compartment access cover on the back of the refrigerator will have to be removed to reinstall the bolt.

8

Page 7 Page 9
Page 8
Image 8
KitchenAid Cabinet Depth Side-by-Side Refrigerator Leveling Your Refrigerator, Base Grille, To replace the base grille
Page 7 Page 9

Cabinet Depth Side-by-Side Refrigerator specifications

The KitchenAid Cabinet Depth Side-by-Side Refrigerator is a remarkable appliance that seamlessly blends style and functionality. This refrigerator is designed to fit flush with your cabinetry, providing a sleek and integrated look to your kitchen. Its modern, stainless-steel exterior not only adds a touch of elegance but is also fingerprint-resistant, making maintenance simple and hassle-free.

One of the standout features of this refrigerator is its spacious interior, designed to accommodate large groceries and meal prep items. The adjustable shelves allow for customizable storage options, adapting to your needs. The refrigerator section boasts bright LED lighting that illuminates every corner, making it easy to find what you're looking for even in low light.

Equipped with advanced cooling technologies, this KitchenAid refrigerator maintains optimal food freshness and quality. The dual refrigeration system circulates cold air throughout both the refrigerator and freezer compartments, preventing odor transfer and keeping food at the perfect temperature. The Preserva Food Care System further enhances fresh-food preservation, utilizing a combination of humidity-controlled drawers and a separate cooling system to maintain ideal conditions for fruits, vegetables, and other perishables.

The refrigerator features a convenient exterior water and ice dispenser, offering chilled water, ice cubes, and crushed ice at your fingertips. The ice maker is designed for optimal output and efficiency, ensuring you’ll never run out of ice when hosting gatherings.

In addition to its core features, the KitchenAid Cabinet Depth Side-by-Side Refrigerator includes various smart technologies. By integrating with your smart home system, you can monitor and adjust settings remotely, ensuring your food stays fresh even when you’re away.

Finally, this refrigerator is designed with energy efficiency in mind, meeting ENERGY STAR standards to help reduce your energy bills while minimizing your carbon footprint. The combination of style, space, and smart features makes the KitchenAid Cabinet Depth Side-by-Side Refrigerator an essential addition to any modern kitchen, catering to the needs of both home chefs and busy families alike.
Top Page Image Contents